FormulaMod
16-Pin 12VHPWR GPU Extension Cable, FormulaMod Fm-Y124P, 450 mm, Male to Female
450 mm 12VHPWR GPU extension cable
The FormulaMod Fm-Y124P is a 450 mm (17.7 in) male-to-female extension for an existing 16-pin (12+4) 12VHPWR GPU power cable. It adds reach between the original cable and the graphics card so you can route the cable through the case. Choose black or white sleeving, both with black connectors.
Compatibility
Check both ends of your power connection before ordering.
- ✓Existing cable: a 16-pin (12+4) 12VHPWR male plug at the graphics card end.
- ✓Graphics card: a 16-pin (12+4) 12VHPWR power input.
Not compatible:
- ✗PCIe 6-pin or 8-pin power connectors
- ✗Legacy 12-pin power connectors without the four small signal positions
Check the instructions for your exact graphics card and power supply before adding an extension. Keep the existing power cable connected to the PSU.
Design Highlights
16 AWG tinned copper
The power wires have an insulating layer and a woven outer sleeve.
Sleeved wires with cable combs
Cable combs keep the sleeved wires aligned along the visible part of your cable run.
Key Specifications
| Black SKU | Fm-Y124P-BKP124-BK-S-450 |
|---|---|
| White SKU | Fm-Y124P-BKP124-WT-S-450 |
| Cable length | 450 mm (17.7 in) |
| GPU end | Straight 16-pin (12+4) 12VHPWR male plug |
| Existing cable end | Straight 16-pin (12+4) 12VHPWR female socket |
| Power wires | 16 AWG tinned copper |
| Power wire sleeving | Individually woven, black or white |
| Connector housings | Black on both versions |
Which Version Do I Need?
Which connector is on your existing GPU power cable?
What's in the Box
Installation & Use
You also need the existing 16-pin 12VHPWR GPU power cable specified for your hardware.
FAQ
Does this cable plug directly into a modular power supply?
Use it at the graphics card end of the existing power cable. The extension’s female socket receives the existing cable, and its male plug connects to the graphics card.
Can I connect it to a PCIe 8-pin power lead?
This extension accepts a 16-pin (12+4) 12VHPWR plug. PCIe 8-pin plugs use a different connector.
How do I check my graphics card’s power connector?
Look up the power input for your exact card model in its manual. Check for a 16-pin (12+4) 12VHPWR input and follow the power supply and cabling instructions for that card.
How long is the extension cable?
The extension is 450 mm long, or about 17.7 inches.
- If you reposition the cable combs, slide them gently to avoid damaging the small signal wires.











