Bykski
D5 Pump with PWM and Optional CT60 Reservoir – Bykski B-UL-D5-X-V4
D5 pump for custom PC liquid cooling
The Bykski B-UL-D5-X-V4 is a PWM-controlled D5 pump that circulates coolant through a custom PC liquid cooling loop. Use the pump with a separate reservoir you already have, or select a CT60 tube reservoir that mounts directly to the pump head. The pump connects to the rest of the loop with G1/4 fittings.
Fits & Reservoir Options
Choose a reservoir option under Water Tank Size.
- ✓None — pump assembly for a loop with a separate reservoir
- ✓CT60 combo — 60 mm reservoir
- ✓CT60 combo — 100 mm reservoir
- ✓CT60 combo — 150 mm reservoir
- ✓CT60 combo — 200 mm reservoir
The size selector gives the nominal size of the reservoir with its top cap. The pump adds to the installed height. For a direct-mount reservoir, check for Bykski’s matching 60 mm thread.
Design Highlights
POM pump head and aluminum housing
The POM pump head has a threaded seat for a matching tube reservoir. An aluminum alloy housing covers the motor.
PWM speed control with feedback
Adjust the D5 pump speed through a compatible motherboard PWM header or controller. A separate lead provides power, and the PWM lead also carries the pump’s speed feedback.
Key Specifications
| Model | B-UL-D5-X-V4 |
|---|---|
| Pump type | D5 |
| Color | Black |
| Pump head | POM |
| Motor housing | Aluminum alloy |
| Reservoir tube | Clear acrylic (PMMA) on CT60 combos |
| Pump dimensions (H × W × D) | 79.40 × 69.00 × 69.00 mm |
| Pump ports | G1/4 |
| Maximum flow | 720 L/h |
| Rated power supply | 12 V DC |
| Input voltage range | 8–20 V DC |
| Rated input current | 1.85 A |
| Maximum input current | 2.0 A |
| Input power | 22 W |
| Power connector | 4-pin peripheral Molex |
| PWM signal | 1–100 kHz, 10–100% duty cycle |
| Coolant temperature | 0–70 °C |
| Ambient conditions | −25 to 70 °C, under 90% RH |
| Pump protection | Stall, overvoltage, and reverse polarity |
| Noise in Bykski’s test | Up to 40 dBA measured 1 m horizontally from the pump, with background noise up to 20 dB |
Which Version Do I Need?
What's in the Box
Installation & Use
For a new loop, you also need a water block, radiator, G1/4 fittings, matching tubing, and coolant. Add a separate reservoir if you select the pump-only option.
FAQ
Does the D5 pump come with a reservoir?
Choose None for the pump assembly without a reservoir, or select a 60, 100, 150, or 200 mm CT60 reservoir.
How big is the D5 pump body?
The pump is 79.40 mm tall with a 69.00 × 69.00 mm footprint. Allow additional space for your fittings and any reservoir you mount on top.
What is the pump’s maximum flow?
Bykski specifies a maximum flow of 720 L/h. Flow in an assembled loop depends on its restriction.
What happens if I leave the PWM signal lead disconnected?
With Molex power connected and the PWM signal lead unplugged, the pump defaults to full speed.
What coolant can I use?
Bykski lists ethylene glycol and propylene glycol as supported coolant types. Use a compatible PC loop coolant and keep its temperature within 0–70 °C.
- Never run the pump dry. Coolant lubricates its moving parts.
- Keep the pump out of direct sunlight and away from direct UV exposure.











