FormulaMod
PSU Extension Cable Kit with 8-Pin GPU Options, FormulaMod Fm-NCK1, 300 mm, Two-Tone
Two-tone PSU extension cable kit
The FormulaMod Fm-NCK1 kit adds 300 mm of two-tone sleeved cable to the component ends of your original PC power supply leads. It gives the visible motherboard and graphics card wiring a coordinated look. Choose a kit by the ATX, CPU EPS, and GPU PCIe connectors your build needs.
Compatibility
Connect each extension to the matching component end of its original PSU lead.
- ✓Motherboard main power · ATX 24-pin
- ✓Motherboard CPU power · EPS 8-pin (4+4)
- ✓Graphics card power · PCIe 8-pin (6+2) or PCIe 6-pin, depending on the kit
Never insert an extension directly into a modular PSU socket. Use the EPS and PCIe connectors only for their designated sockets.
Check the connector types, counts, and latch positions before ordering. ATX and EPS cables bend toward the latch side. PCIe cables bend away from it.
Design Highlights
Two colors in each sleeve
The braid combines black with blue, green, orange, purple, or red. Choose the color pair you want on the cables visible inside your case.
Pre-shaped bends with cable combs
The inner and outer rows of wire are sized for the curve so the sleeves line up through the bend. Two combs per cable hold the wires in position.
Key Specifications
| Series model | Fm-NCK1 |
|---|---|
| Extension length | 300 mm (11.8 in) |
| Wire gauge | 18 AWG |
| Cable diameter | 3 mm |
| Cable construction | Braided sleeve over an insulated conductor |
| Housing references | 5557 / 5559 (FormulaMod) |
| Pre-bend | 180° |
| Kit options | A, B, C, D, E, F, G, H |
Cable Counts by Kit
| Kit A | 1 × ATX 24-pin, 1 × EPS 8-pin, 2 × PCIe 8-pin |
|---|---|
| Kit B | 1 × ATX 24-pin, 1 × EPS 8-pin, 2 × PCIe 6-pin |
| Kit C | 1 × ATX 24-pin, 1 × EPS 8-pin, 1 × PCIe 8-pin, 1 × PCIe 6-pin |
| Kit D | 1 × ATX 24-pin, 1 × EPS 8-pin, 1 × PCIe 8-pin |
| Kit E | 1 × ATX 24-pin, 1 × EPS 8-pin, 1 × PCIe 6-pin |
| Kit F | 1 × ATX 24-pin, 2 × EPS 8-pin, 2 × PCIe 8-pin, 2 × PCIe 6-pin |
| Kit G | 1 × ATX 24-pin, 1 × EPS 8-pin, 2 × PCIe 8-pin, 2 × PCIe 6-pin |
| Kit H | 1 × ATX 24-pin, 1 × EPS 8-pin, 3 × PCIe 8-pin |
Which Version Do I Need?
Choose the kit letter by connector count, then pick the sleeve color.
What's in the Box
Use the Cable Counts by Kit table to check the exact contents of your selection.
Installation & Use
You need your PSU’s original component cables and the matching sockets on your motherboard or GPU.
FAQ
Can I connect the extensions directly to a modular PSU?
Plug them into the component ends of your original PSU leads. Keep the original leads attached to the PSU.
Which kit includes two 8-pin GPU extensions?
Kit A has two PCIe 8-pin (6+2) leads, one ATX 24-pin and one CPU EPS 8-pin. Kits F and G also have two 8-pin GPU leads and add two PCIe 6-pin leads.
How long is each extension?
Every kit uses 300 mm (11.8 in) extensions.
Is there a green option?
Choose Black x Green for green and black threads woven into each sleeve. It is available in Kits A through H.
- Because of the different display setting of each computer, the pictures and real objects will be slightly color different.
- All cables have been assembled, please don't disassemble at will
*If you need DIY adjustment, please pay attention to use special tools and not use too much force. - In case of upgrading to the appearance and structure, or different batches of material, no further notice, the real object shall prevail.
- The product pictures of this link use "Kit A" as the display product and reference color.
The actual product content and quantity will be sent according to the kit option you selected.










