• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

5V ARGB Hub and Fan Controller — Bykski B-RBW-C8-V5, 6 Fan Ports and 1 Pump Port

stars, based on ( 0 ) review
$10.97 piece
items available
Contact Us
FormulaMod Official Store
Bykski · B-RBW-C8-V5

5V ARGB lighting, fan, and pump hub

The Bykski B-RBW-C8-V5 brings 5V 3-pin addressable RGB lighting and cooling controls together on one board. Connect compatible fans, a pump, and their lighting leads at the hub. Use the remote to change lighting effects and brightness, or connect the hub to a compatible motherboard ARGB header to synchronize the lighting.

Fits
5V 3-pin ARGB lighting
Fan ports
6 × 2510 4-pin
Pump port
1 × 2510 4-pin
Power input
4-pin Molex

Compatibility

Check the voltage and connector on each lead.

  • ✓Lighting devices with a matching 5V 3-pin ARGB (RBW) connector
  • ✓Fans and a pump with matching 2510 4-pin motor connectors
  • ✓For lighting sync, a motherboard with a 5V 3-pin ARGB header

Not compatible:

  • ✗12V 4-pin RGB lights or motherboard lighting headers

The 12V specification is for the fan motor connections. The lighting connections use 5V.

Design Highlights

Bykski B-RBW-C8-V5 hub board viewed from above with separate fan and ARGB headers and the red pump connector

Separate connections for motors and lighting

Each of the six fan positions pairs a fan motor header with an ARGB header. The pump position has its own motor and ARGB headers. FAN1 and PUMP send back real-time speed readings.

Lighting control at the remote or motherboard

Use the remote to pick a solid color, switch effects, or adjust brightness and effect speed. It also has separate buttons for fan and pump speed.

Key Specifications

ModelBykski B-RBW-C8-V5
Lighting5V DC, 3-pin addressable RGB (RBW)
Fan connections6 × 2510 4-pin, 12V DC
Pump connection1 × 2510 4-pin
Speed feedbackFAN1 and PUMP
Power input connector4-pin peripheral Molex
Published module load limits6 A maximum load current, 72 W supported power
Lighting controlRemote or 5V 3-pin motherboard ARGB sync

Which Version Do I Need?

Match both the device connectors and the power lead to the hub.

Bykski B-RBW-C8-V5THIS PAGE
Choose this kit for 5V 3-pin ARGB lighting, separate 2510 4-pin motor connections, and Molex power.
Choose this hub for Barrow devices with matching 6-pin combined connectors and a SATA power lead.

What's in the Box

1 × controller hub board1 × remote control
Bykski B-RBW-C8-V5 controller hub next to its handheld remote with color and speed buttons

Installation & Use

1
Switch off the PC and disconnect power. Plug the fan motor leads into the FAN ports and the pump motor lead into PUMP. Connect the 5V lighting leads to the ARGB headers.
2
If you’re using a pump, set the onboard switch to normal mode for a compatible 4-pin pump or to GFM mode for a compatible Granzon pump. Power-cycle the hub after changing the switch.
3
For motherboard lighting sync, use a compatible sync cable to connect the hub to the motherboard’s 5V 3-pin ARGB header. Align the arrow on the sync connector with the motherboard header’s +5V pin. For motherboard fan control, connect the separate fan PWM lead to the motherboard FAN header.
4
Connect the power supply’s 4-pin peripheral Molex lead to the hub’s marked POWER input. Check connector orientation before restoring power. To activate motherboard lighting sync, press MAINBOARD MODE on the remote.

You’ll need a PC power supply with a 4-pin peripheral Molex lead and devices with the matching connectors above.

FAQ

Can I use this hub with 12V RGB lights?

Use 5V 3-pin ARGB lights only. For motherboard lighting sync, use a 5V 3-pin ARGB header.

Do I need an ARGB header on my motherboard?

The remote can control the lighting directly. A 5V 3-pin ARGB header is required for motherboard lighting sync.

How do I switch to motherboard lighting control?

Use a compatible sync cable to connect the hub to the motherboard’s 5V 3-pin ARGB header. Align the arrow on the sync connector with the motherboard header’s +5V pin. After powering on, press MAINBOARD MODE on the remote.

Which ports report fan and pump speed?

The FAN1 and PUMP ports provide real-time speed feedback.

When should I use GFM mode?

Use GFM mode for a compatible Granzon pump and normal mode for a compatible standard 4-pin pump. Power-cycle the hub after changing the mode.

Notes
  • Not responsible for any damage caused by or when using this product. Please use at your own risk.

FormulaMod Official Store

Recent Reviews
+