Bykski
Palit RTX 5090 GameRock 32GB Water Block with Backplate – Bykski N-PT5090GK-SR-V2
Full-cover water block for Palit RTX 5090 GameRock
The Bykski N-PT5090GK-SR-V2 is a full-cover GPU water block for the Palit GeForce RTX 5090 GameRock 32GB PCB shown below. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators to the coolant in a custom loop. A separate aluminum backplate mounts behind the board.
Compatibility
Bykski lists this graphics card for the SR-V2.
- ✓Palit GeForce RTX 5090 GameRock 32GB
Before ordering, match your card's PCB to the photo, including the mounting holes, component positions, and power connector.
Design Highlights
Stainless steel panel with short-edge ports
The 304 stainless steel panel covers the front of the block. Both G1/4 connections sit at the short end, where the tubing and fittings need clearance.
Copper cold plate for the GPU, memory, and VRM
The nickel-plated cold plate has machined contact areas for the GPU die, memory, and designated voltage regulator components. Inside the block, coolant flows through 0.3 mm jet microchannels.
Key Specifications
| Model (SKU) | N-PT5090GK-SR-V2 |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Front panel | 304 stainless steel |
| Block finish | Titanium gray |
| Backplate | Black aluminum, passive |
| Water block (L × W × T) | 233.66 × 136.25 × 17.00 mm |
| Backplate (L × W × T) | 209.97 × 136.25 × 3.96 mm |
| Port thread | G1/4 female |
| Microchannels | 0.3 mm, jet flow |
| Seal material | EPDM |
| Net weight | 1.68 kg |
| Maximum working pressure | 2 bar |
| Block temperature range | −20 to 60 °C |
Which Version Do I Need?
Choose the panel and port layout that suit your build. Check the PCB guide on the listing for the version you choose.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Will this water block fit my RTX 5090?
Bykski lists the Palit GeForce RTX 5090 GameRock 32GB for this SKU. Compare your card's PCB to the photo before ordering.
What fittings should I use?
Use G1/4 fittings sized for your tubing.
Where do the thermal pads go?
Place the pads on the memory and voltage regulator components highlighted in gray in the installation diagram.
Where does the backplate sit?
The included passive aluminum backplate mounts behind the graphics card PCB, outside the coolant loop.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- The product does NOT come with English instructions.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













