Bykski
Gigabyte RTX 4080 Water Cooling Block with Backplate – Bykski N-GV4080EOC-X
Full-cover water block for select Gigabyte RTX 4080 16GB cards
The Bykski N-GV4080EOC-X is a full-cover water block that replaces the stock air cooler on select Gigabyte GeForce RTX 4080 16GB cards, including the EAGLE with a matching PCB. Its nickel-plated copper cold plate transfers heat from the GPU core, memory, and voltage regulators to your custom liquid cooling loop. An aluminum backplate and 5V addressable lighting are included.
Compatibility
Bykski lists the following Gigabyte PCB layouts.
- ✓Gigabyte GeForce RTX 4080 16GB EAGLE
GV-N4080EAGLE-16GD - ✓Gigabyte GeForce RTX 4080 16GB AERO OC
GV-N4080AERO OC-16GD - ✓Gigabyte GeForce RTX 4080 16GB GAMING OC
GV-N4080GAMING OC-16GD - ✓Gigabyte AORUS GeForce RTX 4080 16GB MASTER
GV-N4080AORUS M-16GD
Before ordering, confirm your card’s full part number and compare its PCB layout with the board photo in the product gallery.
Design Highlights
Clear acrylic top and aluminum backplate
The clear top lets you see the coolant path. The included black aluminum backplate mounts behind the PCB, outside the coolant path.
Jet microchannels over the GPU
Coolant passes through the fine channels above the GPU contact area, where it picks up heat from the copper cold plate.
5V addressable lighting
For motherboard sync, use a lighting adapter cable to connect the strip to a 5V 3-pin ARGB header. You can also use a compatible 5V ARGB controller.
Key Specifications
| Manufacturer model | N-GV4080EOC-X |
|---|---|
| Cold plate | 9 mm nickel-plated T2 copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and VRM |
| Inlet and outlet thread | G1/4 |
| Water block (L × W × T) | 232.65 × 167.44 × 26.25 mm |
| Backplate (L × W × T) | 232.65 × 137.44 × 6.00 mm |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
Start with your graphics card’s PCB. Confirm the fit on the listing for the block you choose.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, also have a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
How do I tell if this water block fits my RTX 4080?
Match the full graphics card part number to the compatibility list above, then compare your PCB with the gallery’s board photo before ordering.
What fittings does the block take?
Use G1/4 fittings for the loop connections. The included stop plugs close the unused ports.
Can I connect the lighting to a 12V RGB header?
Connect the strip only to 5V ARGB equipment. A 12V 4-pin RGB header can damage the lighting.
Is the included backplate water-cooled?
The included black aluminum backplate is passive and mounts behind the PCB. Coolant flows through the block on the front of the card.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













