• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Gigabyte RTX 4080 Water Cooling Block with Backplate – Bykski N-GV4080EOC-X

stars, based on ( 0 ) review
€133.47 set
items available
Contact Us
FormulaMod Official Store
Bykski · N-GV4080EOC-X

Full-cover water block for select Gigabyte RTX 4080 16GB cards

The Bykski N-GV4080EOC-X is a full-cover water block that replaces the stock air cooler on select Gigabyte GeForce RTX 4080 16GB cards, including the EAGLE with a matching PCB. Its nickel-plated copper cold plate transfers heat from the GPU core, memory, and voltage regulators to your custom liquid cooling loop. An aluminum backplate and 5V addressable lighting are included.

Fits
Select Gigabyte RTX 4080 16GB PCBs
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Bykski lists the following Gigabyte PCB layouts.

  • ✓Gigabyte GeForce RTX 4080 16GB EAGLE
    GV-N4080EAGLE-16GD
  • ✓Gigabyte GeForce RTX 4080 16GB AERO OC
    GV-N4080AERO OC-16GD
  • ✓Gigabyte GeForce RTX 4080 16GB GAMING OC
    GV-N4080GAMING OC-16GD
  • ✓Gigabyte AORUS GeForce RTX 4080 16GB MASTER
    GV-N4080AORUS M-16GD

Before ordering, confirm your card’s full part number and compare its PCB layout with the board photo in the product gallery.

Bykski N-GV4080EOC-X compatibility reference showing the Gigabyte GeForce RTX 4080 16GB EAGLE with its stock air cooler

Gigabyte GeForce RTX 4080 16GB EAGLE with its stock cooler.

Design Highlights

Bykski N-GV4080EOC-X angled view of the clear acrylic water block and separate black aluminum backplate

Clear acrylic top and aluminum backplate

The clear top lets you see the coolant path. The included black aluminum backplate mounts behind the PCB, outside the coolant path.

Bykski N-GV4080EOC-X close-up illustration of the cold plate’s microchannel fins

Jet microchannels over the GPU

Coolant passes through the fine channels above the GPU contact area, where it picks up heat from the copper cold plate.

Bykski N-GV4080EOC-X clear water block illuminated in red, purple, and blue

5V addressable lighting

For motherboard sync, use a lighting adapter cable to connect the strip to a 5V 3-pin ARGB header. You can also use a compatible 5V ARGB controller.

Key Specifications

Manufacturer modelN-GV4080EOC-X
Cold plate9 mm nickel-plated T2 copper
TopClear acrylic
BackplateBlack aluminum, passive
Cooling coverageGPU core, memory, and VRM
Inlet and outlet threadG1/4
Water block (L × W × T)232.65 × 167.44 × 26.25 mm
Backplate (L × W × T)232.65 × 137.44 × 6.00 mm
Lighting5V 3-pin addressable RGB (RBW)
Bykski N-GV4080EOC-X dimension drawings of the water block and backplate in millimeters

Bykski drawings. Water block above, backplate below. Dimensions are in millimeters.

Which Version Do I Need?

Start with your graphics card’s PCB. Confirm the fit on the listing for the block you choose.

Bykski N-GV4080EOC-XTHIS PAGE
Choose this version for a clear acrylic top with 5V ARGB and a black aluminum backplate.
Choose this version if you prefer an opaque metal and POM housing.
Compare this Aurora block if you want Barrow’s LRC 2.0 lighting system.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate2 × G1/4 stop plugsMounting hardware setThermal pad set1 × 5V ARGB light strip

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system, remove the card, and take off its stock cooler. Remove the old pads and clean the residue from the GPU and contact areas.
2
Check the block against the PCB and confirm that the mounting holes line up.
3
Follow the pad layout for your PCB and mounting kit. Apply pads to the specified memory and VRM contact points, then apply your own thermal paste to the GPU die.
4
Seat the block and secure it with the supplied mounting hardware. Fit the backplate on the rear of the PCB and tighten the screws evenly.
5
Connect the loop with G1/4 fittings at the marked inlet and outlet. Close unused ports with the supplied stop plugs.
6
Leak-test the loop with the graphics card and other system components unpowered.

For a new loop, also have a pump, radiator, G1/4 fittings, tubing, and coolant.

Bykski N-GV4080EOC-X exploded mounting diagram showing the block, PCB, pads, fasteners, and backplate

1 Water block · 2 Thermal pads · 3 Graphics card PCB · 4 Washers · 5 Spring screws · 6 Backplate · 7 Backplate screws

FAQ

How do I tell if this water block fits my RTX 4080?

Match the full graphics card part number to the compatibility list above, then compare your PCB with the gallery’s board photo before ordering.

What fittings does the block take?

Use G1/4 fittings for the loop connections. The included stop plugs close the unused ports.

Can I connect the lighting to a 12V RGB header?

Connect the strip only to 5V ARGB equipment. A 12V 4-pin RGB header can damage the lighting.

Is the included backplate water-cooled?

The included black aluminum backplate is passive and mounts behind the PCB. Coolant flows through the block on the front of the card.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+