• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

G1/4 Anti-Cyclone Reservoir Fitting – Barrow TDSHH-V2 in White, Black, or Silver

stars, based on ( 0 ) review
$2.30 piece
items available
Contact Us
FormulaMod Official Store
Barrow · TDSHH-V2

G1/4 anti-cyclone fitting for PC water cooling reservoirs

The Barrow TDSHH-V2 is a brass anti-cyclone fitting for a custom PC water cooling reservoir. Its G1/4 male thread screws into a matching port on the inside of the reservoir. Side slots spread the incoming coolant sideways to soften the impact of the stream as it enters the tank.

Fits
Internal G1/4 female port
Body
Brass
Colors
White, black, shiny silver

Fits

Use this fitting inside the reservoir.

  • ✓A G1/4 female port accessible from inside the tank

Check the reservoir’s drawing for room around the port and enough depth for the threaded section.

Design Highlights

Barrow TDSHH-V2 black fitting showing the side slots and threaded end

Side slots disperse the incoming stream

Coolant enters through the threaded end and spreads through the long slots into the reservoir.

Barrow TDSHH-V2 white fitting showing the cylindrical body and external thread

14 mm brass body

The body is 12.6 mm across and 14 mm high, with a separate 5 mm threaded section. Use the drawing below to check the space around your reservoir port.

Key Specifications

ModelTDSHH-V2
Body materialBrass
ThreadG1/4 male
Body diameter12.6 mm
Body height14 mm, excluding thread
Thread length5 mm
ColorsWhite, black, shiny silver
Barrow TDSHH-V2 dimension drawing with a side view and an angled view of the fitting

Barrow dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Both fittings mount inside a water cooling reservoir. Compare the body diameter with the space around your port.

Barrow TDSHH-V2THIS PAGE
Choose this 12.6 mm slotted body in white, black, or shiny silver when it matches your reservoir’s clearance.
Compare this silver fitting if your reservoir has room for its 20 mm body with round side holes.

What's in the Box

1 × Barrow TDSHH-V2 fitting in your selected color
Barrow TDSHH-V2 shiny silver fitting showing the open threaded end and side slots

Installation & Use

1
Check your reservoir’s instructions for a usable G1/4 female port on the inside and verify clearance against the dimension drawing.
2
Access the port as shown in the reservoir’s instructions, then screw the fitting into the port from inside the tank.
3
Reassemble the reservoir according to its instructions before refilling the loop.

You’ll need a reservoir with an accessible internal G1/4 female port.

FAQ

Where does this anti-cyclone fitting go?

It screws into a G1/4 female port from inside the reservoir. Check that there’s room for the body around that port.

What do the side slots do?

They spread the incoming coolant sideways to soften the stream entering the reservoir.

How tall is the fitting?

The body is 14 mm tall, and the G1/4 threaded section adds 5 mm.

Can I order it in white or black?

Yes. Choose white, black, or shiny silver. Each order unit contains one fitting in the selected color.

Notes
  • In case of product appearance structure upgrade,without further notice,in kind prevail

FormulaMod Official Store

Recent Reviews
+