Bykski B-TSPD5 Flow Buffer Diverter Defoamer Water Tank Built-in Baffle

Bykski B-TSPD5 Flow Buffer Diverter Defoamer Water Tank Built-in Baffle

TL;DR: The B-TSPD5 is an internal reservoir fitting machined from electroplated brass with a standard G1/4 inlet thread. Once threaded into the reservoir inlet, it slows and diverts the incoming coolant jet, splitting the stream so that turbulence and noise inside the tank are reduced. The diverted flow...

Common Applications

The B-TSPD5 is an internal reservoir fitting machined from electroplated brass with a standard G1/4 inlet thread. Once threaded into the reservoir inlet, it slows and diverts the incoming coolant jet, splitting the stream so that turbulence and noise inside the tank are reduced. The diverted flow also breaks up bubbles entrained during fill and bleed, which speeds up loop priming and reduces the bubble carryover that can stall a pump. The fitting installs hand-tight inside the reservoir and is intended as an internal accessory, not a standalone tank.

Frequently Asked Questions

Q: What thread does the B-TSPD5 use?

A: G1/4, the same thread as standard water cooling fittings, so it screws into any G1/4 reservoir inlet port.

Q: What is it made of?

A: Electroplated brass with a silver finish.

Q: What problems does it solve?

A: Reduces inlet jet noise, cuts splash and turbulence, and helps eliminate bubbles during fill and bleed.

Q: Is the B-TSPD5 a standalone reservoir?

A: No. It is an internal fitting that must be installed inside an existing G1/4-threaded reservoir.

Q: What is in the package?

A: 1x B-TSPD5 internal flow buffer fitting.