• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

ASUS TUF RTX 5090 Full-Cover GPU Water Block – Barrow BS-AST5090-PA

stars, based on ( 0 ) review
$115.91 piece
items available
Contact Us
FormulaMod Official Store
Barrow · BS-AST5090-PA

Full-cover water block for ASUS TUF RTX 5090

The Barrow BS-AST5090-PA replaces the stock air cooler on the ASUS TUF Gaming GeForce RTX 5090 and 5090 D models listed below. In a custom liquid cooling loop, its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant. An aluminum alloy backplate mounts behind the card.

Fits
Listed ASUS TUF 5090 / 5090 D cards
Cold plate
Copper
Ports
G1/4 inlet and outlet
Lighting
5V addressable RGB

Compatibility

Barrow lists four compatible ASUS TUF Gaming graphics card models.

  • ✓GeForce RTX 5090 OC 32GB (TUF-RTX5090-O32G-GAMING)
  • ✓GeForce RTX 5090 32GB (TUF-RTX5090-32G-GAMING)
  • ✓GeForce RTX 5090 D OC 32GB (TUF RTX5090 D O32G GAMING)
  • ✓GeForce RTX 5090 D 32GB (TUF RTX5090 D 32G GAMING)

Before ordering, verify your card’s full model number and check its PCB layout.

Barrow BS-AST5090-PA compatibility reference photo showing the ASUS TUF RTX 5090 OC with its stock three-fan cooler

ASUS TUF Gaming GeForce RTX 5090 OC with its stock cooler.

Design Highlights

Barrow BS-AST5090-PA bare cold plate showing the central microchannels and surrounding coolant passages

Microchannels over the GPU core

Barrow specifies 10 mm copper stock and CNC machining for the illustrated BS-AST5090-PA. Coolant passes through 43 microchannels above the GPU core.

Barrow BS-AST5090-PA black backplate with diagonal openings and mounting holes

Aluminum alloy backplate

The passive backplate mounts behind the PCB. Choose a black or white backplate. Both versions have a clear acrylic top.

Barrow BS-AST5090-PA clear acrylic water block illuminated in purple and blue

Addressable lighting through clear acrylic

The built-in Barrow LRC 2.0 lighting shines through the clear top. For motherboard control, use a separately sold Barrow adapter cable with a 5V 3-pin ARGB header.

Key Specifications

ModelBS-AST5090-PA
Cooling coverageGPU core, memory, and power delivery components
Cold plateCopper
TopClear acrylic
BackplatePassive aluminum alloy, black or white
Port threadG1/4 inlet and outlet
Length × width228.80 × 151.40 mm
Side-view thickness23.10 mm and 24.10 mm at the points shown
Microchannels43. Groove width 0.5 mm, spacing 0.3 mm
I/O bracket designDual-slot
LightingBarrow LRC 2.0. Motherboard connection via a 5V 3-pin ARGB adapter
Barrow BS-AST5090-PA dimensioned drawing with plan and side views of the water block

Barrow’s dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Start with the model on your card’s label. Barrow lists a separate water block for ASUS TUF RTX 5080 cards.

Barrow BS-AST5090-PATHIS PAGE
Choose this block for an ASUS TUF RTX 5090 or 5090 D model listed above after checking its PCB layout.
Check this block’s compatibility list if your card is an ASUS ROG Astral RTX 5090.

What's in the Box

1 × full-cover GPU water block1 × aluminum alloy backplate in the selected color2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC and remove the graphics card. Disconnect the cooler’s fan cable and remove the stock cooler and backplate.
2
Clean away the old thermal materials. Cut and place the pads where shown on the pad map, using the thickness indicated for each position. Apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate. Follow Barrow’s mounting diagram for screw and spacer placement.
4
Connect the loop with G1/4 fittings. Follow the block’s inlet and outlet positions and seal unused openings with the supplied stop plugs.
5
Leak-test the filled loop before powering the graphics card.

Connect the block to a compatible custom loop using G1/4 fittings sized for your tubing. A typical loop also has a pump, radiator, reservoir, and coolant. For motherboard lighting control, use a 5V 3-pin ARGB adapter cable sold separately.

Barrow BS-AST5090-PA pad placement map showing three numbered thickness groups on the underside of the water block

Barrow’s installation diagram specifies the pad thickness at each position. ① 1.2 mm · ② 0.5 mm · ③ 1.0 mm. Cut the pads to the shapes shown.

FAQ

Does this water block fit my ASUS TUF RTX 5090 D?

Barrow lists the TUF RTX 5090 D O32G GAMING and TUF RTX 5090 D 32G GAMING. Check your exact model and PCB layout before ordering.

Which fittings do I need?

Choose G1/4 fittings sized for your tubing. The box includes two stop plugs. Buy the tube fittings separately.

How do I connect the lighting to my motherboard?

Use a separate Barrow adapter cable with a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the lighting.

What changes between black and white?

The backplate finish changes. Both versions have a clear acrylic top and built-in addressable lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+