Barrow
ASUS TUF RTX 5090 Full-Cover GPU Water Block – Barrow BS-AST5090-PA
Full-cover water block for ASUS TUF RTX 5090
The Barrow BS-AST5090-PA replaces the stock air cooler on the ASUS TUF Gaming GeForce RTX 5090 and 5090 D models listed below. In a custom liquid cooling loop, its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant. An aluminum alloy backplate mounts behind the card.
Compatibility
Barrow lists four compatible ASUS TUF Gaming graphics card models.
- ✓GeForce RTX 5090 OC 32GB (TUF-RTX5090-O32G-GAMING)
- ✓GeForce RTX 5090 32GB (TUF-RTX5090-32G-GAMING)
- ✓GeForce RTX 5090 D OC 32GB (TUF RTX5090 D O32G GAMING)
- ✓GeForce RTX 5090 D 32GB (TUF RTX5090 D 32G GAMING)
Before ordering, verify your card’s full model number and check its PCB layout.
Design Highlights
Microchannels over the GPU core
Barrow specifies 10 mm copper stock and CNC machining for the illustrated BS-AST5090-PA. Coolant passes through 43 microchannels above the GPU core.
Aluminum alloy backplate
The passive backplate mounts behind the PCB. Choose a black or white backplate. Both versions have a clear acrylic top.
Addressable lighting through clear acrylic
The built-in Barrow LRC 2.0 lighting shines through the clear top. For motherboard control, use a separately sold Barrow adapter cable with a 5V 3-pin ARGB header.
Key Specifications
| Model | BS-AST5090-PA |
|---|---|
| Cooling coverage | GPU core, memory, and power delivery components |
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Passive aluminum alloy, black or white |
| Port thread | G1/4 inlet and outlet |
| Length × width | 228.80 × 151.40 mm |
| Side-view thickness | 23.10 mm and 24.10 mm at the points shown |
| Microchannels | 43. Groove width 0.5 mm, spacing 0.3 mm |
| I/O bracket design | Dual-slot |
| Lighting | Barrow LRC 2.0. Motherboard connection via a 5V 3-pin ARGB adapter |
Which Version Do I Need?
Start with the model on your card’s label. Barrow lists a separate water block for ASUS TUF RTX 5080 cards.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
Connect the block to a compatible custom loop using G1/4 fittings sized for your tubing. A typical loop also has a pump, radiator, reservoir, and coolant. For motherboard lighting control, use a 5V 3-pin ARGB adapter cable sold separately.
FAQ
Does this water block fit my ASUS TUF RTX 5090 D?
Barrow lists the TUF RTX 5090 D O32G GAMING and TUF RTX 5090 D 32G GAMING. Check your exact model and PCB layout before ordering.
Which fittings do I need?
Choose G1/4 fittings sized for your tubing. The box includes two stop plugs. Buy the tube fittings separately.
How do I connect the lighting to my motherboard?
Use a separate Barrow adapter cable with a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the lighting.
What changes between black and white?
The backplate finish changes. Both versions have a clear acrylic top and built-in addressable lighting.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













