Barrow
Barrow SPB17-V2 17W PWM Water Cooling Pump for TKDDCG50 Reservoir
17W PWM pump for a direct-mount reservoir
The Barrow SPB17-V2 is a 17W pump that circulates coolant through a custom PC water cooling loop. The Barrow TKDDCG50 reservoir screws onto the acrylic pump top, so the reservoir feeds coolant directly into the pump. Choose the pump on its own if you already have a matching reservoir, or order it with a reservoir.
Compatible Reservoirs
Choose a Barrow TKDDCG50 reservoir for direct mounting.
- ✓TKDDCG50-60 (60 mm)
- ✓TKDDCG50-90 (90 mm)
- ✓TKDDCG50-140 (140 mm)
- ✓TKDDCG50-190 (190 mm)
- ✓TKDDCG50-240 (240 mm)
The lengths refer to the reservoir. Leave space for the pump beneath it and for fittings and fill access above.
Design Highlights
Threaded acrylic top
The reservoir fits into the large threaded seat. With the reservoir in place, the side G1/4 outlet sends coolant to the rest of the loop. The aluminum alloy shell has a threaded mounting hole underneath.
Dial control or PWM
The pump defaults to PWM control. Turn the speed knob clockwise to set the speed manually. Turn it fully counterclockwise to return to PWM.
Separate lighting connection
The acrylic top lights up with Barrow LRC 2.0. Use the included adapter cable to connect the lighting to a 5 V 3-pin ARGB header on your motherboard.
Key Specifications
| Model | SPB17-V2 |
|---|---|
| Pump finish | Black |
| Pump top / shell | Acrylic / aluminum alloy |
| Rated power | 17 W |
| Pump supply | 12 V DC, 4-pin peripheral Molex |
| Speed signal | 4-pin PWM |
| Maximum flow | 960 L/h |
| Maximum speed | 4,000 RPM |
| Pump-top footprint | 62.20 × 62.20 mm |
| Pump port threads | G1/4 |
| Lighting | Barrow LRC 2.0, 5 V 3-pin ARGB |
| Bundle reservoir | Clear acrylic with a black POM cap |
| Reservoir cap ports | 2 × G1/4 |
Which Version Do I Need?
Match the pump or reservoir to how you plan to mount it.
What's in the Box
The reservoir comes with the bundle only. The pump does not include a lighting controller.
Installation & Use
You also need G1/4 fittings, tubing, coolant, a radiator, and the water blocks for your loop.
FAQ
Do I need a reservoir for the SPB17-V2?
Use a TKDDCG50 reservoir to feed coolant into the pump. Every Pump + Reservoir option includes one. Choose Just Pump if you already have the matching reservoir.
Do the listed lengths include the pump?
The 60, 90, 140, 190, and 240 mm options describe the reservoir length. Allow additional room for the pump, fittings, and access for filling.
Does the PWM header power the pump?
The pump takes 12 V power from a 4-pin peripheral Molex connection on the power supply. The separate 4-pin PWM lead carries the speed-control signal.
How do I switch between manual and PWM control?
Turn the knob clockwise to enter manual mode. Turn it all the way counterclockwise to go back to PWM.
How do I connect the lighting to my motherboard?
Connect the pump’s LRC 2.0 lighting lead to a 5 V 3-pin ARGB header with the included adapter cable. The pump does not include a lighting controller.
- In case product appearance upgrade, without further notice, prevail in kind.













