Barrow SPB17-V2 17W PWM Pump Module for Reservoir Combination, LRC 2.0 5V ARGB, G1/4, Manual or PWM Speed Control

Barrow SPB17-V2 17W PWM Pump Module for Reservoir Combination, LRC 2.0 5V ARGB, G1/4, Manual or PWM Speed Control

TL;DR: The SPB17-V2 is a 17W PWM pump module sized to combine with separately purchased reservoir tubes of 60, 90, 140, 190, or 240mm length. The pump body itself is roughly 55mm tall, so total stack height after pairing with a reservoir is about 115mm with a 60mm tube up to 295mm with a 240mm tube. Inlet...

Common Applications

The SPB17-V2 is a 17W PWM pump module sized to combine with separately purchased reservoir tubes of 60, 90, 140, 190, or 240mm length. The pump body itself is roughly 55mm tall, so total stack height after pairing with a reservoir is about 115mm with a 60mm tube up to 295mm with a 240mm tube. Inlet and outlet are G1/4 threaded with a brushless motor and ceramic bearing rated for continuous duty. Speed is set either by the onboard manual switch or by the 4-pin PWM cable, and the integrated lighting ring uses the LRC 2.0 5V 3-pin ARGB standard for motherboard synchronization.

Frequently Asked Questions

Q: Can I run the SPB17-V2 without a reservoir?

A: No. The pump module is designed to be fed by a reservoir mounted directly to its intake; standalone operation will starve and damage it.

Q: What reservoir lengths does it pair with?

A: 60mm, 90mm, 140mm, 190mm, and 240mm Barrow reservoir tubes. Pick based on how much coolant volume and height you want in the loop.

Q: How tall is the pump section?

A: The pump module itself is about 55mm tall. Total assembled height depends on the reservoir tube chosen, e.g. 115mm with a 60mm res or 295mm with a 240mm res.

Q: What ARGB connector does it use?

A: Standard LRC 2.0 5V 3-pin ARGB. Do not plug into a 12V 4-pin RGB header.

Q: How is speed controlled?

A: Either by the onboard manual speed switch or by the 4-pin PWM cable from a motherboard or fan hub.