• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Phanteks

5V ARGB LED Strip for PC Cases – Phanteks NEON PH-NELEDKT (M1, CMBO, M5)

stars, based on ( 0 ) review
€15.04 piece
items available
Contact Us
FormulaMod Official Store
Phanteks · NEON PH-NELEDKT

5V ARGB LED strips for PC cases

The Phanteks NEON PH-NELEDKT series brings diffused, addressable RGB lighting to the edges of PC cases, motherboards, and other hardware. Use the included adapter to connect to a compatible 5V 3-pin ARGB motherboard header. The flexible strips and mounting clips let you follow corners, curves, and straight edges inside the case.

Fits
5V 3-pin ARGB headers
Lighting
Addressable RGB
Strip color
Black
Mounts
90°, 180°, and flat

Compatibility

Check the lighting connector before ordering.

  • ✓5V 3-pin ARGB motherboard header (+5V, data, gap, ground) using the included motherboard adapter
  • ✓5V D-RGB case lighting or controllers with a matching Phanteks 3-pin connector

Not compatible:

  • ✗12V 4-pin RGB headers

Design Highlights

Black Phanteks NEON PH-NELEDKT_M1 strip glowing blue below and beside the rear fan and along the case frame

Outline the hardware you want to highlight

The strip diffuses the light along its length. Route it around the edge of your motherboard or along the case frame for a continuous line of color.

Phanteks NEON PH-NELEDKT lighting strips arranged in curves and right-angle paths

Route the strip around corners

Use flat or 180° mounts along a straight run and 90° mounts where the strip turns a corner. Adhesive pads hold the mounts in place.

Key Specifications

Lighting5V addressable RGB (D-RGB)
Strip colorBlack
Strip width × thickness13 × 5.5 mm
Strip inputPhanteks 3-pin female
Strip outputPhanteks 3-pin male
LEDs per stripM1 70 · CMBO 28 · M5 38
Maximum current per stripM1 2.1 A · CMBO 0.84 A · M5 1.14 A
Phanteks NEON PH-NELEDKT_CMBO kit with two curved 400 mm strips, one lit and one unlit

The CMBO option includes two 400 mm strips.

Which Version Do I Need?

Use the Option selector to pick the strip layout that suits your build.

M1 · PH-NELEDKT_M1
Choose the single 1,000 mm strip for a long, continuous run.
CMBO · PH-NELEDKT_CMBO
Choose two 400 mm strips to light two shorter areas.
m5 · PH-NELEDKT_M5
Choose this option for a shorter single-strip run.

What's in the Box

1 × motherboard D-RGB adapter per kit90°, 180°, and flat mounts3M adhesive pads

M1 includes one 1,000 mm NEON strip and four mounts of each type.

CMBO includes two 400 mm NEON strips, one extension cable, and four mounts of each type.

m5 includes one NEON strip.

Installation & Use

1
Shut down the PC, switch off the power supply, and unplug the power cord before connecting the strip. Lay out the strip along the edge you want to light and choose mounts to match the route.
2
Secure the mounts with the supplied adhesive pads and fit the strip into the mounts.
3
Connect the strip to a compatible 5V D-RGB controller with a matching connector or use the included adapter with a compatible 5V 3-pin ARGB motherboard header. For a motherboard connection, line up the adapter’s +5V position with the header’s +5V pin.
4
To chain another strip, plug its female input into the previous strip’s male output. Use the CMBO extension cable if you need more reach between the strips.

You need a compatible 5V 3-pin ARGB motherboard header or a compatible 5V D-RGB controller for power and lighting control.

Phanteks NEON PH-NELEDKT corner, straight, and flat mounting clips

From left to right, the 90° mount, 180° mount, and flat mount.

FAQ

Do I need a separate ARGB controller?

Use the included adapter if your motherboard has a compatible 5V 3-pin ARGB header. If you have neither that header nor a compatible case lighting controller, use a compatible 5V D-RGB controller with a matching connector. The kits do not include a controller.

Which header should I check on an MSI motherboard?

Check your motherboard manual for the 5V 3-pin ARGB header, its pinout, and its load limit. Depending on the model, MSI may label it JRAINBOW or JARGB_V2. Do not connect the strip to a 12V 4-pin JRGB header.

Can I daisy-chain the two CMBO strips?

Yes. Connect one strip’s Phanteks 3-pin output to the other’s input. Use the included extension cable if the strips are farther apart.

Can I mount the strip around a corner?

Use the supplied 90° mount at a corner. The kits also include 180° and flat mounts for straight sections.

Notes
  • Before adding devices to the chain, check the total current and LED count against the limits in your motherboard or controller manual.

FormulaMod Official Store

Recent Reviews
+