• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

RTX 4090 FE Water Block with Backplate – Granzon GBN-RTX4090FE

stars, based on ( 0 ) review
€262.60 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GBN-RTX4090FE

Full Armor water block for the RTX 4090 Founders Edition

The Granzon GBN-RTX4090FE replaces the stock cooler on the NVIDIA GeForce RTX 4090 Founders Edition so you can connect the card to a custom liquid cooling loop. The full-cover copper cold plate draws heat from the GPU core, memory, and voltage regulators. The aluminum front armor and passive backplate sit outside the coolant path.

Fits
GeForce RTX 4090 FE
Cold plate
Copper
Microchannels
0.3 mm
Backplate
Passive aluminum

Compatibility

Designed for NVIDIA’s original RTX 4090 Founders Edition PCB.

  • ✓NVIDIA GeForce RTX 4090 Founders Edition

Not compatible:

  • ✗GeForce RTX 4090 partner cards with non-FE PCBs
  • ✗NVIDIA GeForce RTX 4080 Founders Edition

Before ordering, confirm the exact card model and check that its PCB matches NVIDIA’s Founders Edition layout.

Design Highlights

Granzon GBN-RTX4090FE angled view of the assembled water block with slotted armor and two openings at the terminal

Aluminum armor and passive backplate

The aluminum front armor covers the water block. The passive backplate bolts behind the PCB and stays outside the liquid path.

Granzon GBN-RTX4090FE underside view showing the raised contact surfaces on the cold plate

Full-cover copper cold plate

The raised contact surfaces line up with the GPU core, memory, and voltage regulators. Inside the block, coolant runs through 0.3 mm microchannels over the GPU core.

Granzon GBN-RTX4090FE side terminal diagram showing the left port labeled inlet A and the right port labeled outlet B

In this view, the inlet is on the left and the outlet is on the right.

Side-mounted inlet and outlet

Granzon designates port A as the inlet and port B as the outlet. Use the view here to check their positions before routing your tubing.

Key Specifications

Model (SKU)GBN-RTX4090FE
Cold plateCopper
Cold plate (L × W)211.16 × 122.6 mm
Cooling coverageGPU core, memory, and voltage regulators (VRM)
Microchannel width0.3 mm
Front armor and backplateBlack aluminum alloy, outside the coolant path
Overall size (L × W × T)227.2 × 125.7 × 27.1 mm
I/O bracketOne-piece aluminum alloy, 12 mm thick
Granzon GBN-RTX4090FE dimension drawing with face and edge views of the block

Granzon dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Choose the block that matches your Founders Edition card and PCB layout.

Granzon GBN-RTX4090FETHIS PAGE
Choose this model for the NVIDIA GeForce RTX 4090 Founders Edition.
Choose this model for the NVIDIA GeForce RTX 4080 Founders Edition.

What's in the Box

1 × full-cover GPU water block1 × front armor plate1 × passive backplate1 × mounting hardware setThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power down the system. Remove the graphics card and its stock cooler, then clean the old thermal paste and pad residue from the contact surfaces.
2
Confirm the correct pad thicknesses for your kit before mounting. Place the thermal pads at the contact points shown in the 4090 FE diagram and apply your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate as shown. Use the indicated mounting hardware and tighten the screws evenly.
4
Connect the loop to the inlet and outlet as shown in the port diagram. Seal unused port openings with your own stop plugs.
5
Leak-test the loop with the graphics card unpowered.

For the custom loop, you also need a pump, radiator, fittings, tubing, and coolant.

Granzon GBN-RTX4090FE exploded installation illustration showing the block, thermal pads, RTX 4090 FE PCB, backplate, and mounting hardware

Granzon assembly drawing for the RTX 4090 Founders Edition.

FAQ

Which RTX 4090 fits this block?

It fits the NVIDIA GeForce RTX 4090 Founders Edition with NVIDIA’s original FE PCB. Confirm your exact card model and board layout before ordering.

Is the included backplate liquid-cooled?

The included aluminum backplate is passive and sits outside the coolant path.

Which port is the inlet?

In the port diagram, the inlet (A) is on the left and the outlet (B) is on the right.

How much space does the block need?

The block measures 227.2 × 125.7 × 27.1 mm (L × W × T). Check clearance for your fittings and tubing as well.

Notes
  • Stop plugs are not included. Use your own G1/4 stop plugs to seal unused ports.
  • Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+