• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

ASUS RTX 4090 Strix/TUF Water Block with Backplate – Granzon GBN-AS4090STRIX

stars, based on ( 0 ) review
$322.59 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GBN-AS4090STRIX

ASUS RTX 4090 Strix / TUF water block with backplate

The Granzon GBN-AS4090STRIX replaces the stock air cooler on supported ASUS ROG Strix and TUF Gaming GeForce RTX 4090 cards. Its full-cover copper cold plate transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. A separate aluminum backplate mounts behind the graphics card PCB.

Fits
ASUS RTX 4090 Strix / TUF
Cold plate
Copper
Port thread
G1/4
Backplate
Passive aluminum

Compatibility

Match the model code on your ASUS graphics card.

  • ✓ASUS ROG Strix GeForce RTX 4090 24GB (ROG-STRIX-RTX4090-24G-GAMING)
  • ✓ASUS ROG Strix GeForce RTX 4090 24GB OC (ROG-STRIX-RTX4090-O24G-GAMING)
  • ✓ASUS TUF Gaming GeForce RTX 4090 24GB (TUF-RTX4090-24G-GAMING)
  • ✓ASUS TUF Gaming GeForce RTX 4090 24GB OC (TUF-RTX4090-O24G-GAMING)

Not compatible:

  • ✗ASUS TUF Gaming GeForce RTX 4090 OG
  • ✗ASUS ROG Strix LC GeForce RTX 4090
  • ✗NVIDIA GeForce RTX 4090 Founders Edition

Before ordering, confirm the exact model code and verify your card’s full PCB layout against the compatibility listing.

Design Highlights

Granzon GBN-AS4090STRIX machined contact face beside the detached slotted backplate

Full-cover cold plate

The cold plate spans the GPU die, memory, and voltage regulators. Coolant passes through 0.3 mm jet microchannels at the GPU core.

Granzon GBN-AS4090STRIX angled view of the assembled slotted armor and port openings

Aluminum armor on both sides

The front armor and passive backplate wrap around the PCB. Both aluminum pieces sit outside the coolant path.

Granzon GBN-AS4090STRIX side view of the assembled block and display connector bracket

One-piece aluminum I/O bracket

The 12 mm aluminum bracket supports the assembly at the display connector end. The inlet and outlet sit on a separate terminal along the side of the block.

Key Specifications

ModelGBN-AS4090STRIX
Cold plateCopper
Front armor and passive backplateBlack aluminum
Cooling coverageGPU core, memory, and VRM
Jet microchannels0.3 mm
Port threadG1/4
Block size (L × W × T)245.60 × 136.94 × 37.40 mm
I/O bracket12 mm aluminum alloy
Granzon GBN-AS4090STRIX front and side dimension drawing with length, width, and thickness in millimeters

Manufacturer’s block dimensions, in millimeters.

Which Version Do I Need?

Choose by the exact model on your graphics card label.

Granzon GBN-AS4090STRIXTHIS PAGE
Choose this block if your RTX 4090 matches one of the four ASUS model codes above.
Check this version for a TUF Gaming RTX 4090 OG or ROG Strix LC RTX 4090.
Check this version for an ASUS ROG Strix or TUF Gaming RTX 4080.
Choose this version for NVIDIA’s RTX 4090 Founders Edition PCB.

What's in the Box

1 × full-cover GPU water block1 × aluminum front armor plate1 × aluminum backplateMounting hardware setThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system, remove the graphics card, and take off the stock cooler and backplate. Clean away the old paste and pad residue.
2
Confirm the pad thickness and contact points for your card and block. Place the thermal pads at the specified contact points and apply your own thermal paste to the GPU die.
3
Align the PCB, block, and backplate. Fit the mounting hardware as shown in the manufacturer’s diagram and tighten the screws gradually.
4
Connect the loop with G1/4 fittings. Connect the supply to inlet A and the return to outlet B. Provide your own G1/4 stop plugs to seal the unused ports.
5
Leak-test the loop with the graphics card unpowered.

Plan for a pump, reservoir, radiator and fans, tubing, G1/4 fittings, and coolant. Use the included thermal pads at the contact points shown in the diagram. Have your own GPU thermal paste ready before disassembly.

Granzon GBN-AS4090STRIX exploded installation drawing showing the block, thermal pads, graphics card PCB, backplate, and mounting hardware

Manufacturer’s assembly drawing.

FAQ

Is the RTX 4090 backplate included?

Yes. The kit includes a passive aluminum backplate that mounts behind the graphics card PCB.

Will this block fit my case?

Compare your available space with the block’s 245.60 × 136.94 × 37.40 mm dimensions. Allow additional room for the fittings, tubing, and graphics card power connector.

What fittings should I use, and which port is the inlet?

Use G1/4 fittings. In the manufacturer’s port view, with the cold plate facing you and the terminal at the top, the right opening (A) is the inlet and the left opening (B) is the outlet.

How do I confirm that my ASUS RTX 4090 fits?

Match the ASUS model code to the compatibility list and verify the PCB layout before ordering. For a TUF Gaming RTX 4090 OG or ROG Strix LC RTX 4090, check the GBN-AS4090TUFOG version.

Notes
  • Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+