FormulaMod
5V 3-Pin ARGB Controller with 4-Pin Molex Power | FormulaMod Fm-TBYK
Manual ARGB Lighting Control with Molex Power
The FormulaMod Fm-TBYK is a manual 5V 3-pin ARGB controller for PC fan lighting and LED strips with a matching plug. It draws power from a 4-pin Molex connector on your PC power supply. Use the buttons on the cable to change lighting effects even if your motherboard has no ARGB header.
Fits / Use With
- ✓5V 3-pin ARGB fan lighting leads with a matching plug
- ✓5V 3-pin ARGB LED strips with a matching plug
Not compatible:
- ✗12V 4-pin RGB lighting
Before ordering, check that the blocked hole on your lighting plug lines up with the missing pin on the controller. A fan’s motor uses its separate power and speed-control cable.
Design Highlights
Change effects at the cable
Use the two Mode buttons to step through lighting effects. The middle Speed button adjusts the effect speed.
Power from the PSU
The D-shaped Molex plug connects to a peripheral power lead from your PC power supply. The smaller connector on the controller is the lighting output.
Key Specifications
| Model (SKU) | Fm-TBYK |
|---|---|
| Lighting output | One 5V 3-pin ARGB connector with a keyed gap |
| Power input | D-type 4-pin Molex peripheral connector |
| Controls | Three buttons on the inline controller |
| Mode memory | Retains the selected lighting mode after power-off |
Which Version Do I Need?
Choose by how you want to control the lighting.
What's in the Box
Installation & Use
You’ll need a free 4-pin Molex power connector and a light strip or fan with a matching 5V 3-pin ARGB lighting lead.
FAQ
Do I need a motherboard ARGB header?
The inline buttons control lighting directly. A 4-pin Molex connection to your PC power supply powers the controller.
Can I connect 12V 4-pin RGB lighting?
Use a matching 12V RGB controller for those lights. The Fm-TBYK supports 5V 3-pin ARGB lighting.
Does it control fan speed?
It controls the fan’s lighting. Connect the fan’s motor cable separately for power and speed control.
Will the controller remember my lighting mode after power-off?
Yes. It retains the selected lighting mode when power is disconnected.
- This controller just suitable for for A-RGB 5v 3pin











