• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

FormulaMod

2280 M.2 SSD Heatsink Kit for PS5 and PC | FormulaMod Fm-M2SRP Series

stars, based on ( 0 ) review
€15.49now€6.29 set
0items available
Contact Us
FormulaMod Official Store
FormulaMod · Fm-M2SRP Series

Passive heatsink kit for 2280 M.2 SSDs

The FormulaMod Fm-M2SRP series adds passive cooling to a 2280 M.2 PCIe NVMe SSD in a PS5 expansion bay or PC. A thermal pad sits between the drive and the finned aluminum heatsink, and two rubber rings hold the assembly together. Check the assembled drive against your slot’s clearance before installing it.

Fits
2280 M.2 NVMe
Fm-M2SRP
70 × 22 × 3 mm · Straight fins
Fm-M2SRP-H
70 × 22 × 5.5 mm · Segmented fins
Material
Aluminum

Compatibility

  • ✓PS5 expansion bay with a Sony-compatible 2280 PCIe Gen4 x4 NVMe SSD (Key M).
  • ✓PC M.2 slot that supports a 2280 PCIe NVMe SSD and has clearance for the assembled drive.

Not compatible:

  • ✗M.2 SATA SSDs in the PS5 expansion bay.

Before buying for PS5, check whether your SSD already has a heatsink. Sony recommends against adding another heatsink to a drive with one built in.

For PS5, measure the SSD with the heatsink, pad, and rings installed. Sony allows up to 25 mm in width and 11.25 mm in total thickness, with up to 8.0 mm above the SSD board and 2.45 mm below it.

Key Specifications

Fm-M2SRP (L × W × T)70 × 22 × 3 mm · Straight fins
Fm-M2SRP-H (L × W × T)70 × 22 × 5.5 mm · Segmented fins
Drive format2280 M.2 PCIe NVMe SSD
Heatsink materialAluminum
Heatsink colorBlack
Thermal pad thickness1 mm nominal (±0.1 mm by batch)
MountingTwo rubber retaining rings
FormulaMod Fm-M2SRP-H black finned heatsink and thermal pad held on an example M.2 SSD by two rubber rings

Fm-M2SRP-H · 5.5 mm heatsink

What's in the Box

1 × aluminum heatsink1 × thermal pad2 × rubber retaining rings1 × cleaning wipe pack

SSD sold separately.

Installation & Use

1
Peel the protective film from both sides of the thermal pad.
2
Place the pad on the SSD and set the heatsink on top of the pad.
3
Slip both rubber rings around the SSD, pad, and heatsink to secure the assembly.
4
Check clearance, then mount the assembly in the M.2 slot. On PS5, make sure the expansion bay cover closes properly.

FAQ

Does the Fm-M2SRP-H’s 5.5 mm thickness include the SSD and thermal pad?

The Fm-M2SRP-H heatsink alone is 5.5 mm thick. Check clearance with your SSD, pad, and rings assembled.

Does the kit include an SSD?

The SSD in the product photo is shown for reference. Use your own 2280 M.2 PCIe NVMe SSD.

Do I peel the film from both sides of the thermal pad?

Yes. Remove both protective films before mounting the pad between the drive and the heatsink.

Notes
  • 1.Item size may be some error between batches of this product
  • If the product encounters a problem or needs to be returned, please communicate and solve it with the seller first. Items sent back to us without first requesting a return will not be accepted.
  • See the FormulaMod Return Policy for return eligibility and refund conditions.
  • 3.In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+