FormulaMod
PCIe 5.0 Vertical GPU Mount Kit with x16 Riser Cable | FormulaMod Fm-XKCZTZ-5.0-BK
Vertical GPU mount with a PCIe 5.0 riser
The FormulaMod Fm-XKCZTZ-5.0-BK is a black vertical GPU mount for compatible ATX cases. The steel bracket holds a desktop graphics card with its face toward the case side panel. The included PCIe 5.0 x16 riser cable links the card to the motherboard’s graphics slot.
Compatibility
Check the rear expansion-slot area and clearance for your exact GPU before ordering.
Use the bracket dimensions to check the mounting area. Make sure the card and cooler clear the side panel, bottom fans, and other cards, and that you can reach the GPU’s display ports.
FormulaMod shows example builds in the Lian Li LANCOOL 216 and Jonsbo D41.
Design Highlights
Rear-mounted steel bracket
The 1.5 mm steel bracket fastens at the rear expansion-slot area and holds the card upright inside the case.
Riser for the motherboard connection
The edge connector plugs into the motherboard. The socket at the other end sits on the bracket and accepts the graphics card.
Key Specifications
| Model | Fm-XKCZTZ-5.0-BK |
|---|---|
| Color | Black |
| Bracket material | 1.5 mm steel plate |
| Bracket dimensions (D × W × H) | 197 × 121 × 127 mm |
| Riser interface | PCIe 5.0 x16 |
Which Version Do I Need?
What's in the Box
Installation & Use
You’ll need a compatible case, motherboard, and graphics card, plus the power and display cables your card uses.
FAQ
Will the riser work with PCIe 4.0 or 3.0?
Yes. The riser supports both. Gen 5 operation requires support from the CPU, the motherboard’s graphics slot, and the GPU.
How do I check case fit?
Compare the bracket dimensions with the space at the rear slots. Allow room for the card, its cooler, and the display cable plugs.
Which color comes with this kit?
The Fm-XKCZTZ-5.0-BK includes a black bracket and black riser cable.
- If you get no picture after installation, power off and check the riser connections, GPU power cable, and display cable.










