FormulaMod Fm-XKCZTZ-5.0-ARGB Vertical GPU Mounting Kit with 150mm PCIe 5.0 x16 Riser Cable and 5V ARGB

FormulaMod Fm-XKCZTZ-5.0-ARGB Vertical GPU Mounting Kit with 150mm PCIe 5.0 x16 Riser Cable and 5V ARGB

TL;DR: The Fm-XKCZTZ-5.0-ARGB kit rotates the graphics card 90 degrees inside the chassis so the card faces the side panel for a clean showcase orientation. It pairs a 150mm PCIe 5.0 x16 riser cable with a steel steering bracket and a 5V 3-pin addressable RGB accent that can be synced through standard...

Common Applications

The Fm-XKCZTZ-5.0-ARGB kit rotates the graphics card 90 degrees inside the chassis so the card faces the side panel for a clean showcase orientation. It pairs a 150mm PCIe 5.0 x16 riser cable with a steel steering bracket and a 5V 3-pin addressable RGB accent that can be synced through standard motherboard ARGB software. PCIe 5.0 signaling is preserved end-to-end when the motherboard, riser and GPU all support Gen5, and the cable remains backward compatible with PCIe 4.0 and 3.0 hardware. The kit suits ATX and MATX chassis with seven-slot rear cutouts; users running a full-cover water block or 3-slot air card should confirm that overall card thickness clears the side panel before installing.

Chassis adaptation: Chassis with more than 7 slots is required. Some 7-slot chassis (such as NVK3 and Patriot promotion chassis) need to be equipped with cooling fans at the bottom, and there is no sinking space to ensure hardware installation space and heat dissipation foundation

Frequently Asked Questions

Q: What PCIe generation and length is the riser cable?

A: The included riser cable is PCIe 5.0 x16, 150mm long, and backward compatible with PCIe 4.0 and 3.0 systems.

Q: What kind of cases does it fit?

A: It is intended for ATX and MATX chassis with seven-slot rear cutouts and side-panel showcase orientation.

Q: How is the ARGB lighting controlled?

A: Through a standard 5V 3-pin addressable RGB header so it can be synced with motherboard ARGB software such as ASUS Aura, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome.

Q: Will it work with thick water-cooled or 3-slot GPUs?

A: Yes, but verify the combined card-plus-block or card-plus-cooler thickness clears the side panel and surrounding chassis hardware before mounting vertically.

Q: Is the bracket adjustable?

A: The kit ships with a fixed-position vertical bracket sized to standard ATX/MATX seven-slot rear cutouts; adjustable-height variants are sold separately under different FormulaMod SKUs.