• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

FormulaMod

120mm Magnetic Fan Dust Filter, FormulaMod Fm-FCW, Black PVC Mesh

stars, based on ( 0 ) review
€1.82now€1.09 piece
items available
Contact Us
FormulaMod Official Store
FormulaMod · Fm-FCW

Add a dust filter to a 120 mm case intake

The FormulaMod Fm-FCW is a magnetic dust filter for 120 mm PC case fan openings. The black PVC mesh sits across the opening to help catch dust as air enters the case. Four magnetic strips around the underside secure the filter to the case.

Fits
120 mm case fan openings
Material
Black PVC mesh
Mount
Magnetic strips on four edges

Fit & Mounting

For 120 mm PC case fan openings with a rim that holds a magnet.

Before ordering, check that the 120 × 120 mm filter will sit flat against the rim.

Design Highlights

FormulaMod Fm-FCW black square PVC mesh filter viewed at a low angle

Black PVC mesh

The mesh spans the fan opening to help keep dust from entering the case.

FormulaMod Fm-FCW underside close-up showing the raised magnetic strips and the mesh between them

Magnetic edges

Each edge has a 10 mm wide magnetic strip on the underside. This is the side that goes against the case.

Key Specifications

Model / SKUFm-FCW (1 filter)
Fm-FCWx3 (3 filters)
Filter dimensions (L × W × T)120 × 120 × 2 mm
Mesh materialPVC
ColorBlack
MountingMagnetic strips on all four underside edges
Magnetic strip width10 mm

Which Version Do I Need?

FormulaMod Fm-FCW Magnetic FilterTHIS PAGE
Choose this version for a 120 mm case fan opening with a rim that holds a magnet.
Choose the screw-mount version to fasten the filter to a 120 mm fan with matching corner screw holes.

What's in the Box

Fm-FCW: 1 magnetic mesh filterFm-FCWx3: 3 magnetic mesh filters
FormulaMod Fm-FCWx3 set of three overlapping black square mesh filters

The three-filter option.

Installation & Use

1
Measure the area around the fan opening and test the rim with a magnet where the strips will sit.
2
Center the mesh over the opening with the magnetic strips facing the case.
3
Set the filter down so the strips sit flat against the rim.

FAQ

How can I check that the filter will hold to my case?

Test the rim with a magnet where the filter’s four underside strips will sit.

How much room should I leave for the filter?

Each filter is 120 × 120 mm and 2 mm thick, including the underside strips.

What do I get in the three-pack?

Fm-FCWx3 contains three separate 120 × 120 mm magnetic mesh filters.

FormulaMod Official Store

Recent Reviews
+