• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

FormulaMod

Modular PSU Cable Kit, 18 AWG Silver-Plated | FormulaMod Fm-DYXZ

stars, based on ( 1 ) reviews
items available
Contact Us
FormulaMod Official Store
FormulaMod · Fm-DYXZ

Silver-plated modular PSU cable kit

The FormulaMod Fm-DYXZ is an 18 AWG cable kit that replaces the original DC cables on select fully modular desktop power supplies, including listed EVGA SuperNOVA and Corsair models. The silver-plated wires run directly from the PSU to the motherboard, graphics card, and peripherals. Choose the PSU version first, then pick the kit for your cable runs and GPU power connectors.

Fits
Select fully modular PSUs
Wire gauge
18 AWG
Finish
Silver-plated wire, clear jacket
Kit options
A, A+, B

Selected PSU Models Listed by FormulaMod

Match the exact power supply model and revision before choosing a kit.

  • ✓EVGA SuperNOVA G2 · 550, 650, 750, 850, 1000, 1300, and 1600 W
  • ✓EVGA SuperNOVA G3 · 550, 650, 750, 850, and 1000 W
  • ✓EVGA SuperNOVA G+ · 650, 750, 850, and 1000 W
  • ✓Corsair RMx (legacy) · RM550x, RM650x, RM750x, RM850x, RM1000x
  • ✓Corsair RMi · RM650i, RM750i, RM850i, RM1000i
  • ✓Corsair SF (legacy) · SF450, SF600
  • ✓ASUS ROG Thor (original) · ROG-THOR-850P, ROG-THOR-1200P

For the Seasonic or Antec option, ask FormulaMod to confirm your exact PSU model before ordering.

Use the model number and revision from the PSU label to confirm the PSU-side pinout with FormulaMod. A mismatch can damage components even when the plugs fit. Select your confirmed PSU option before choosing A, A+, or B.

Design Highlights

FormulaMod Fm-DYXZ Kit A lineup illustration showing the component-side plugs and SATA splitter

Silver finish and cable combs

The clear jacket leaves the silver-plated wire visible. The included cable combs keep the wires aligned.

FormulaMod Fm-DYXZ Kit B lineup illustration showing the ATX, PCIe, EPS, SATA and Molex plugs

Shorter runs with Kit B

Kit B uses shorter motherboard, CPU, and GPU leads than Kits A and A+. Measure the route behind your motherboard tray before choosing.

Connectors by Kit

FormulaMod Fm-DYXZ Kit A+ line drawing of the PCIe power lead

Kit A+ adds a GPU lead

Three PCIe 6+2-pin cables, each 650 mm.

FormulaMod Fm-DYXZ Kit A line drawing of the SATA splitter with two inline connectors

Kit A SATA splitter

The two SATA connectors are 50 mm apart.

FormulaMod Fm-DYXZ Kit B line drawing of the 24-pin motherboard lead

Kit B has a shorter ATX lead

The motherboard lead is 400 mm long.

Key Specifications

ModelFormulaMod Fm-DYXZ
Cable typeDirect-replacement modular DC power cables
Wire18 AWG, silver plated
JacketClear insulation
Cable diameter2 mm
TerminalsCopper
ATX 24-pin lengthA and A+ 650 mm
B 400 mm
EPS 4+4-pin lengthA and A+ 850 mm
B 650 mm
PCIe 6+2-pin lengthA and A+ 650 mm
B 400 mm
SATA power lengthsA and A+ 350 mm and 500 mm
B includes one 400 mm lead
Kit A SATA splitter350 mm to the first connector, then 50 mm between connectors
Molex 4-pin lengthAll kits 350 mm

Replacement Kit or Extension?

FormulaMod Fm-DYXZTHIS PAGE
Choose this kit to replace the original DC cables on a confirmed compatible modular PSU.
Choose these extensions to keep your original PSU cables and extend their component ends.

What's in the Box

Kit A · 8 cablesKit A+ · 9 cablesKit B · 7 cables

Kit A. 1 ATX 24-pin, 1 EPS 4+4-pin, 2 PCIe 6+2-pin, 2 SATA power, 1 SATA splitter, and 1 Molex 4-pin cable.

Kit A+. 1 ATX 24-pin, 1 EPS 4+4-pin, 3 PCIe 6+2-pin, 2 SATA power, 1 SATA splitter, and 1 Molex 4-pin cable.

Kit B. 1 ATX 24-pin, 1 EPS 4+4-pin, 2 PCIe 6+2-pin, 2 SATA power, and 1 Molex 4-pin cable.

All three kits include cable combs.

Installation & Use

1
Confirm that your Fm-DYXZ PSU option matches the exact model and revision on your PSU label.
2
Shut down the PC, switch off the PSU, and unplug the AC cord. Disconnect the original DC cables you are replacing at both ends.
3
Connect the PSU ends to the matching modular ports. Connect ATX and EPS to the motherboard, PCIe to the graphics card, and SATA or Molex to the peripherals that require them.
4
Keep CPU EPS and GPU PCIe leads in their designated sockets. Check that all plugs are fully seated before reconnecting AC power and switching on the PSU.

You’ll need a confirmed compatible fully modular PSU and its AC power cord.

FAQ

Will this cable kit work with my EVGA PSU?

Check the SuperNOVA G2, G3, and G+ entries above. Use the full model number on your power supply label to confirm the EVGA option with FormulaMod.

Where do these modular cables plug in?

They plug directly into the modular PSU and replace its DC cables. If you want to keep the original cables, use extensions at the component ends.

Does the kit include SATA power cables?

All three kits include two SATA power cables. Kit A and Kit A+ each add a SATA splitter.

Which kit has three PCIe power cables?

Kit A+ includes three 650 mm PCIe 6+2-pin cables. Kits A and B each include two PCIe cables.

Does any kit include a native 16-pin GPU cable?

Each kit includes PCIe 6+2-pin GPU leads. The kit contains neither a native 12VHPWR nor a native 12V-2x6 lead.

Notes
  • The power supply in the picture is only for reference display
  • Use this kit only with a PSU model and revision confirmed for the selected FormulaMod cable option. If your exact PSU is not listed above, contact FormulaMod before ordering.
  • FormulaMod is not responsible for damage caused by using these cables with a PSU model or revision that has not been confirmed for the selected cable option.
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+