Barrow
Barrow Leak Tester GJQM-01 for PC Water Cooling, G1/4
stars, based on ( 2 ) reviews
FormulaMod Official Store
Barrow · GJQM-01
Air leak tester for PC water cooling
The Barrow GJQM-01 checks a custom PC water-cooling loop for air leaks before you add coolant. The included hand pump pressurizes the empty loop, and the dial gauge lets you see whether it holds pressure. If the needle falls during the check, inspect the loop connections and seals.
Fits
G1/4 female port
Gauge range
0–1.0 bar
Operation
Hand pump
Fit & Connection
Use an accessible G1/4 female port on your custom water-cooling loop.
The flexible hose ends in a G1/4 male fitting that threads into the loop port.
Key Specifications
| Model | GJQM-01 |
|---|---|
| Loop connection | G1/4 male thread |
| Gauge range | 0–1.0 bar |
| Gauge graduations | Approx. 0.031 bar per division |
| Pressure release | Manual relief valve |
| Color | Black |
What's in the Box
1 × GJQM-01 leak tester set with gauge, hose, and hand pump
How to Air-Test Your Loop
1
Thread the tester into a free G1/4 port on the empty loop and seal the other open ports.
2
Check your loop components’ test pressure limits. Use the hand pump while watching the gauge, and stay within both the component limits and the gauge range.
3
After pumping, turn the relief valve to OFF to hold pressure. If the gauge needle drops, check the loop connections and seals.
4
Turn the relief valve to ON to release the air before removing the tester.
FAQ
Does the tester come with a pump?
Yes. The set includes a hand pump for pressurizing the loop with air.
What does 1.0 bar mean on the gauge?
It is the top of the gauge scale. Confirm the test pressure for your loop components before pumping.
Notes
- In case product appearance upgrade, without further notice, prevail in kind.
By
wrBEIRqX
Tuesday, 10 January 2023555
By
lxbfYeaa
Saturday, 04 September 2021555








