• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

1.5 mm Silicone Thermal Pad for GPU Water Blocks, Bykski B-GRP-1.5-X (100 × 14 mm)

stars, based on ( 0 ) review
$1.78 piece
items available
Contact Us
FormulaMod Official Store
Bykski · B-GRP-1.5-X

1.5 mm silicone thermal pad for GPU water blocks

The Bykski B-GRP-1.5-X is a silicone thermal pad that bridges the gap between a GPU water block and the memory chips or MOSFETs it cools. The strip measures 100 × 14 × 1.5 mm. Use it at contact points where your water block specifies a 1.5 mm pad.

Fits
1.5 mm pad locations
Strip size
100 × 14 mm
Thermal conductivity
6.0 W/(m·K)

Where It Fits

Check the installation guide for your exact GPU water block.

Match the specified pad thickness at each memory or MOSFET contact point before ordering.

Key Specifications

ModelB-GRP-1.5-X
MaterialSilicone
Dimensions (L × W × T)100 × 14 × 1.5 mm
Thermal conductivity6.0 W/(m·K)
ColorGray
Bykski B-GRP-1.5-X gray thermal pad strip in an angled view with one end curved upward

What's in the Box

1 × silicone thermal pad strip

Installation & Use

1
Clean the contact surfaces to remove dust, oil, and old pad residue.
2
Peel off one protective liner and place the pad on the contact area identified in your water block’s guide.
3
Remove the second liner before fitting the water block. Follow the block’s mounting instructions.

FAQ

What is the thermal conductivity?

The pad is rated at 6.0 W/(m·K).

Where do the thermal pad and thermal paste go?

Place pads on the memory and MOSFET contact points shown in your water block’s guide. Follow that guide when applying thermal paste to the GPU die.

Notes
  • If the pad is too thin, it may fail to reach the water block. If it is too thick, the block may lose contact with the GPU die.

FormulaMod Official Store

Recent Reviews
+