• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Bykski Water Cooling Reservoir, 190 mm, T-Virus CT-DNA-AL-V2

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · CT-DNA-AL-V2

190 mm T-Virus spiral reservoir for custom PC loops

The Bykski CT-DNA-AL-V2 is a standalone 190 mm reservoir that holds coolant for a separate pump in a custom PC water cooling loop. The clear acrylic tube puts the internal spiral and coolant level in view. Ports at both ends let you route tubing around the other parts in your case.

Fits
G1/4 fittings
Length
190 mm
Lighting
5V 3-pin ARGB
End caps
Aluminum alloy

Fits / Use with

  • ✓G1/4 male-thread fittings sized for your tubing
  • ✓A separate water cooling pump connected by tubing
  • ✓A 5V RBW lighting controller or header with a matching plug

Check the case clearance with your fittings, mounting hardware, and tubing in place. Connect the light to 5V only.

Design Highlights

Bykski CT-DNA-AL-V2 with black end caps and a black double spiral visible through the clear cylinder

Double spiral in a clear tube

The T-Virus design puts a double spiral inside the acrylic tube. Three ports in each aluminum end cap give you connection points at both ends of the reservoir.

Bykski CT-DNA-AL-V2 with black end caps and a blue spiral shown lit inside the clear cylinder

Addressable lighting for the spiral

The included Bykski RBW light illuminates the spiral. Choose the spiral color and end-cap finish together in the product selector.

Key Specifications

ModelCT-DNA-AL-V2
Overall length190 mm
End cap outer diameter56 mm
TubeClear acrylic
End capsAluminum alloy
Port threads6 × G1/4 female, 3 per cap
Lighting5V 3-pin addressable RGB (Bykski RBW)
End cap / spiral pairingsBlack / black, red, or blue
Gunmetal (Gun Cover) / black, white, red, or blue
Red / red
Blue / blue
Bykski CT-DNA-AL-V2 side drawing showing the 190 mm reservoir and its end cap dimensions

Manufacturer side view. Measurements are in millimeters.

Which Version Do I Need?

Choose by end-cap material and spiral color.

Bykski CT-DNA-AL-V2THIS PAGE
Choose this model for aluminum end caps and a choice of cap and spiral color pairings.
Choose this separate model for white POM end caps and a white spiral.

What's in the Box

1 × cylindrical reservoir2 × ring mounting clamps2 × L-shaped bracketsPort plugs1 × 5V RBW lighting unit

Installation & Use

1
Pick a mounting spot that leaves room to fill the reservoir, then secure it with the mounting clamps and brackets.
2
Use G1/4 fittings to connect the reservoir to the loop. Route the reservoir outlet to the separate pump, keep the pump below the reservoir’s coolant level, and plug unused ports.
3
Fill the loop with coolant. Power only the pump during the leak test and top up the reservoir as air clears. Check every connection before powering the rest of the PC.
4
With the PC off, connect the RBW light to a matching 5V lighting connection.

For a complete loop, you’ll also need a separate pump, a water block, a radiator, tubing, G1/4 fittings, and coolant.

FAQ

Does this Bykski reservoir include a pump?

A separate pump is required. Connect the reservoir to it with tubing.

How much space does the reservoir take up?

It is 190 mm long, with 56 mm diameter end caps. Allow extra room for mounting hardware, fittings, and tubing.

What fittings do I need?

Use G1/4 male-thread fittings. Match the tubing side of each fitting to the tubing you’re using.

What lighting connection does the reservoir use?

It uses Bykski 5V 3-pin addressable RGB, called RBW. Keep it off 12V RGB headers.

Notes
  • Both end caps can be removed for cleaning.

FormulaMod Official Store

Recent Reviews
+