• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Bykski Reservoir for PC Water Cooling, CT-DNA-POM-V2 White DNA Spiral, 190 or 260 mm

stars, based on ( 0 ) review
€24.70 piece
items available
Contact Us
FormulaMod Official Store
Bykski · CT-DNA-POM-V2

White DNA reservoir for custom PC water cooling

The Bykski CT-DNA-POM-V2 is a cylindrical coolant reservoir for custom PC water cooling loops with a separate pump. The clear acrylic tube lets you check the coolant level while filling the loop and keeps the white DNA-style spiral visible. Choose a 190 mm or 260 mm reservoir to suit the space in your case.

Fits
G1/4 fittings
Overall length
190 mm or 260 mm
Cap diameter
56 mm
Lighting
5 V 3-pin ARGB

Use With

Check fitting clearance and the lighting connection before ordering.

  • ✓G1/4 male fittings sized for your tubing
  • ✓A 5 V 3-pin motherboard ARGB header for the included adapter cable

Allow room for the mounting hardware, fittings, tubing and refill access. Keep the 5 V light off 12 V RGB headers.

Design Highlights

Bykski CT-DNA-POM-V2 260 mm reservoir with a white double helix visible through the clear acrylic tube

White spiral in clear acrylic

The included Bykski RBW LED lights the white double helix inside the clear reservoir.

Bykski CT-DNA-POM-V2 close-up of the recessed threaded port in a white POM end cap

Ports at both ends

Each end cap has three threaded ports. Pick ports that give the fittings room and suit your tube routing.

Bykski CT-DNA-POM-V2 manufacturer illustration highlighting a removable POM end cap

Removable end caps

Both POM end caps come off for cleaning.

Key Specifications

ModelCT-DNA-POM-V2
TypeStandalone cylindrical reservoir
Overall length190 mm or 260 mm
End-cap diameter56 mm
End capsWhite POM
Reservoir tubeClear acrylic
SpiralWhite double helix
Port threadG1/4 female
Port count6 total, 3 per end cap
Lighting5 V 3-pin ARGB (Bykski RBW)
Bykski CT-DNA-POM-V2 manufacturer drawings comparing 190 mm and 260 mm lengths with a 56 mm end-cap diameter

Manufacturer drawings. The end view applies to both lengths. Linear dimensions are in millimeters.

Which Version Do I Need?

Measure the available space in your case with the fittings and tubing in mind. The 190 mm and 260 mm options use the same 56 mm end-cap diameter.

CT-DNA-POM-V2THIS PAGE
Choose this model for white POM caps and a white spiral. Use the 190 mm version when length is tight, or the 260 mm version when you have room for the longer tube.
Choose this 190 mm version if you prefer aluminum-alloy end caps on a DNA spiral reservoir.
Choose this POM-cap model if you want a plain clear tube without a spiral insert.

What's in the Box

1 × reservoir in the selected lengthReservoir mounting bracketStop plugs1 × 5 V ARGB light assembly5 V 3-pin motherboard ARGB adapter cable
Bykski CT-DNA-POM-V2 pair of clear circular reservoir mounting clips

Installation & Use

1
Test-fit the reservoir above the pump with space to reach a fill port. Secure the reservoir using the included mounting hardware.
2
Connect the reservoir outlet directly to the separate pump inlet with G1/4 fittings. Connect the return line and seal unused ports with stop plugs.
3
Add coolant before powering the pump. Run only the pump while filling, and top up before the reservoir empties.
4
Check the reservoir caps and every loop connection for leaks before powering the rest of the PC.

For a complete loop, also have a separate pump, G1/4 fittings, tubing, coolant, a radiator and the appropriate water blocks.

FAQ

Does the reservoir come with a pump?

A separate pump is required to circulate coolant. The reservoir holds the coolant and feeds it to the pump.

Is 190 mm or 260 mm the length of the acrylic tube?

Both are overall reservoir lengths, including the two end caps. Leave additional room for your fittings and tubing.

What fittings should I use?

Use G1/4 male fittings that match your tubing. Check that the fitting body clears the recess around the port.

What lighting connection does it use?

Both lengths use Bykski 5 V 3-pin ARGB, also called RBW. Use the included adapter cable to connect the light to a 5 V 3-pin ARGB header on your motherboard.

Product Gallery

Bykski CT-DNA-POM-V2 260 mm white reservoir with its box and clear mounting clips
Bykski CT-DNA-POM-V2 190 mm white reservoir with its box and clear mounting clips
Bykski CT-DNA-POM-V2 260 mm white reservoir showing the full spiral and threaded cap
Bykski CT-DNA-POM-V2 190 mm white reservoir showing the short spiral and threaded cap
Bykski CT-DNA-POM-V2 white reservoir, retail packaging and clear mounting clips on a white background
Bykski CT-DNA-POM-V2 white reservoir, retail packaging and clear mounting clips on a white background

FormulaMod Official Store

Recent Reviews
+