• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Soft Tube Fitting Kit for 10 x 13 or 10 x 16 mm Tubing – Bykski BY-STK

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · BY-STK

Soft tube fitting kit for custom PC water cooling

The Bykski BY-STK kit connects soft tubing to G1/4 ports in a custom PC water-cooling loop. It pairs clear PVC tubing with straight compression fittings sized to match. Use the straight fittings for direct runs, the rotary elbows where the tubing needs to turn, and the stop plugs to close unused ports.

Fits
10 x 13 or 10 x 16 mm soft tubing
Port thread
G1/4
Tubing
3 m of clear PVC
Elbows
90° rotary

Fits / Use with

Match the soft tube’s inner diameter (ID) and outer diameter (OD).

  • ✓BY-STK-13 fits 10 mm ID x 13 mm OD soft tubing.
  • ✓BY-STK-16 fits 10 mm ID x 16 mm OD soft tubing.

Check that the component ports you plan to use have G1/4 female threads.

Design Highlights

Bykski BY-STK silver compression fitting showing the threaded base, black seal and knurled collar

Straight compression fittings

The tube slips over the fitting’s barb and the collar tightens around the outside. Match the collar and barb to the tube’s outer and inner diameters.

Bykski BY-STK silver rotary elbow showing the male thread and female opening

Rotary elbows for tight turns

Screw the male end into a component and thread a straight fitting into the female end. Swivel the elbow to aim the tube run where it needs to go.

Key Specifications

ModelBykski BY-STK
BY-STK-13 tube size (ID x OD)10 x 13 mm
BY-STK-16 tube size (ID x OD)10 x 16 mm
Port threadG1/4
TubingClear PVC
Fitting finishesBlack, white, silver, gold
Bykski BY-STK clear flexible tubing shown coiled with its open end visible

Which Version Do I Need?

Choose by tubing type and the parts you need.

Bykski BY-STK soft tube kitTHIS PAGE
Choose this kit when you need soft tubing, straight fittings, elbows, and plugs for the same loop.
Shop straight fittings separately when you already have 10 x 13 or 10 x 16 mm soft tubing.
Choose this kit for a loop built with rigid acrylic tubing.

What's in the Box

3 m total of clear PVC soft tubing8 × straight compression fittings4 × G1/4 male-to-female 90° rotary elbows2 × G1/4 stop plugs

Installation & Use

1
Plan each run between your loop components, then cut the soft tubing to length with a tubing cutter or suitable scissors.
2
Hand-tighten the straight fittings or rotary elbows into the G1/4 ports. Where you use an elbow, aim its outlet and thread a straight fitting into it. Close any unused ports your component manuals say to plug.
3
Slide a compression collar onto the tube. Push the tube fully onto the fitting’s barb, then thread the collar onto the fitting and tighten it by hand.
4
Leak-test every joint with the rest of the PC hardware unpowered.

For a typical new loop, you’ll also need a water block, radiator, pump, reservoir, and coolant. You can use a combined pump and reservoir.

Bykski BY-STK black stop plug with a knurled edge and a dragon design on its face

Stop plug for an unused G1/4 port.

FAQ

Can I use 10 x 16 mm soft tubing with the BY-STK-13 fittings?

Choose BY-STK-16 for 10 x 16 mm soft tubing. Both sizes have a 10 mm inner diameter, so check the outer diameter as well.

Does the 90° elbow connect directly to the tube?

The elbow is a threaded adapter. Screw the straight compression fitting into its G1/4 female end to attach the tube.

Do I need to buy the soft tubing separately?

Each kit includes 3 m total of clear PVC tubing in the selected size.

Which fittings do I need for rigid acrylic tubing?

Use hard tube fittings sized to the acrylic tube’s outer diameter.

Notes
  • 1. The color between different kind of Fitting might have difference. (For example, the gold color for hard tube fitting might be different with the gold color of 90 degree fitting.)
  • 2. Due to the difference between different monitors, the color of pictures and the real object will be slightly different.
  • 3.In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+