Bykski
Server-Dedicated Pump – Bykski CP-SR-PMD3-X (DDC)
FormulaMod Official Store
Bykski · CP-SR-PMD3-X
Server-dedicated pump for custom liquid cooling
The Bykski CP-SR-PMD3-X circulates coolant in a custom server liquid cooling loop. It pairs a CP-D3PB-X DDC pump core with a POM pump top and an aluminum housing. The top fill port lets you add coolant from above, while the inlet and outlet are on the side.
Max flow
700 L/h
Max head
6 m
Power
12 V DC
Fits
G1/4 outlet fitting
Use With
- ✓Custom liquid cooling loop with a G1/4 fitting at the pump outlet
- ✓12 V DC supply with a 4-pin Molex peripheral connector
Key Specifications
| Model | CP-SR-PMD3-X |
|---|---|
| Pump core | CP-D3PB-X (DDC) |
| Materials | POM top, aluminum housing |
| Pump dimensions | 85.6 × 74 × 75 mm |
| Outlet thread | G1/4 |
| Power input | 12 V DC, 1.5 A via 4-pin Molex |
| Speed control | Separate PWM lead |
| Speed range | 1,800–4,800 RPM |
| Maximum flow | 700 L/h |
| Maximum head | 6 m |
What's in the Box
1 × CP-SR-PMD3-X pump with POM top
Installation & Use
1
Check the available space and secure the pump at your chosen mounting point.
2
Connect the return line to the upper side port and the outgoing line to the lower side port.
3
Add coolant through the top fill port before powering the pump.
4
Power only the pump and check the loop for leaks before powering the rest of the system.
Have tubing, fittings that match your loop, and coolant ready.
FAQ
Where are the fill port, inlet, and outlet?
The fill port is on top. The upper side port is the inlet and the lower side port is the G1/4 outlet.
Does the PWM lead power the pump?
The 4-pin Molex connector supplies 12 V DC power. The separate PWM lead controls pump speed.
Notes
- Allow access above the pump for filling and beside it for the tubing connections.








