• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

COUGAR Panzer EVO Distro Plate – Bykski RGV-CG-Panzer Evo-P

stars, based on ( 0 ) review
€164.09now€113.95 piece
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-CG-Panzer Evo-P

Distro Plate for COUGAR Panzer EVO

The Bykski RGV-CG-Panzer Evo-P is a distro plate for a single-GPU custom liquid cooling loop in the COUGAR Panzer EVO case. Its internal channels route coolant between the CPU block, GPU block, and radiator. Choose the No Pump version if you plan to fit your own compatible Bykski DDC pump, or select Pump With Cover for a preinstalled pump.

Fits
COUGAR Panzer EVO
Port thread
G1/4
Plate length × width
320 × 110 mm

Compatibility

  • ✓COUGAR Panzer EVO

The plate is laid out for one GPU water block. Check the exact model on your case label before ordering.

Key Specifications

No Pump SKURGV-CG-Panzer Evo
Pump With Cover SKURGV-CG-Panzer Evo-DPC
ConstructionAcrylic plate with aluminum mounting backplate
Plate length × width320 × 110 mm
Port threadG1/4
Pump mountBykski DDC

Product Photos

Bykski RGV-CG-Panzer Evo-P distro plate installed to the right of the motherboard, viewed through the side of the case
Bykski RGV-CG-Panzer Evo-P installed in a build photographed at an angle with the front fans visible
Bykski RGV-CG-Panzer Evo-P acrylic distro plate in an angled view with the black pump cover visible
More product photos
Bykski RGV-CG-Panzer Evo-P distro plate viewed from the back at an angle, showing the coolant channels and the black pump cover underneath
Bykski RGV-CG-Panzer Evo-P distro plate with multicolor lighting and a black pump cover

Which Version Do I Need?

RGV-CG-Panzer Evo-P Distro PlateTHIS PAGE
Choose this plate if you already have the rest of your loop or plan to select the parts separately. Pick No Pump or Pump With Cover.
Choose the kit if you want the distro plate bundled with other loop components.

What's in the Box

Distro plateMounting hardware

Pump With Cover includes a preinstalled DDC pump with a heatsink cover.

Installation & Use

1
If you chose No Pump, confirm the exact Bykski DDC model and install the compatible pump on the plate.
2
Mount the plate in the case using the screw holes in its aluminum mounting backplate.
3
Connect the CPU block, GPU block, and radiator with G1/4 fittings and tubing. Seal any unused ports.
4
Fill the loop with coolant and power only the pump to check for leaks before powering the rest of the system.

FAQ

Does the distro plate come with a pump?

Select Pump With Cover for a preinstalled DDC pump with a heatsink cover. If you choose No Pump, supply a compatible Bykski DDC pump.

How do I check which lighting header to use?

If your plate has a lighting lead, check its voltage and pinout before connecting it to a matching motherboard header. If you use an adapter cable, check that each end matches the connector it plugs into. Never connect a 5V 3-pin lead to a 12V 4-pin RGB header.

Notes
  • Build photos show an example loop. A preinstalled pump with a heatsink cover is included only with the Pump With Cover option.

FormulaMod Official Store

Recent Reviews
+