Bykski
DDC pump with PWM control and a clear acrylic top
The Bykski B-PMD3-X is a DDC pump that circulates coolant through a custom PC water cooling loop. Its preinstalled clear acrylic top has G1/4 inlet and outlet ports for connecting the pump to your plumbing. A 12 V Molex connection powers the pump, and a separate PWM lead lets you adjust its speed.
Use With
Match your fittings, reservoir, and power connections before ordering.
- ✓G1/4 fittings for the pump inlet and outlet
- ✓Bykski B-CT50-MBK 50 mm reservoir for direct mounting
- ✓4-pin peripheral Molex from the PC power supply, plus a separate 4-pin PWM control header
Design Highlights
Clear PMMA pump top
The acrylic top comes installed on the black pump housing. Choose G1/4 fittings that match the type and size of tubing in your loop.
Separate power and PWM leads
The large 4-pin Molex plug draws power from the PC power supply. The smaller 4-pin plug carries the PWM signal and reports pump speed.
Key Specifications
| Model | B-PMD3-X |
|---|---|
| Pump type | DDC |
| Pump top | Clear PMMA acrylic |
| Housing | Black engineering plastic |
| Body dimensions | 62 × 62 × 53 mm |
| Inlet and outlet | G1/4 |
| Rated supply | 12 V DC |
| Power connector | 4-pin peripheral Molex |
| Control connector | 4-pin PWM with tachometer feedback |
| Drive and shaft | Sine-wave drive, ceramic shaft |
| Maximum head | 6 m |
Which Version Do I Need?
Bykski lists B-PMD3-X and B-PMD3-COV under separate model numbers. Check the full part number when replacing a PMD3 pump.
What's in the Box
Installation & Use
For a new loop, plan for a reservoir, compatible mounting hardware, G1/4 fittings, matching tubing, coolant, a radiator, and the water block or blocks for your hardware.
FAQ
Do I need a separate DDC pump top?
The clear acrylic pump top comes preinstalled and has G1/4 inlet and outlet ports.
What powers the pump and what controls its speed?
A 4-pin peripheral Molex connector supplies 12 V DC from the PC power supply. The separate 4-pin PWM connector handles speed control and RPM feedback.
Which reservoir can I mount directly?
Bykski shows its 50 mm B-CT50-MBK tube reservoir mounting directly to the pump top.
Do I need special tubing for the G1/4 ports?
Use G1/4 fittings on the pump. Choose the fitting type and size to match the tubing in your loop.
- During filling, stop the pump before the reservoir empties. Running the pump dry can damage it.











