Bykski
Hard Tube Bending Tool | Bykski B-PCTOOL-X, 12/14/16 mm OD
Adjustable bending tool for PC water-cooling hard tubes
The Bykski B-PCTOOL-X guides bends in rigid acrylic and PETG tubing for custom PC water cooling. Set the guide arms on the slotted base to match the angles and spacing you need. Then bend the softened tube against the guides to follow your planned route, including runs that need more than one bend.
Fits / Use with
Use with rigid acrylic or PETG tubing in these outside diameters.
- ✓12 mm OD
- ✓14 mm OD
- ✓16 mm OD
For the silicone bending insert, check the tube’s inside diameter separately.
Design Highlights
Set the bend angle
Move a guide arm along the curved track and tighten it at the angle you need. The guide gives the softened tube a surface to bend against.
Measure between bends
Use the distance scale and straight slots to position the guides when your route calls for a measured gap between bends.
Set up an offset
Reposition the arms to make an offset when two fittings sit out of line. The guides can also be rearranged for successive bends on the same tube.
Key Specifications
| Model | B-PCTOOL-X |
|---|---|
| Color | Black |
| Tubing materials | Rigid acrylic and PETG |
| Tube outside diameter | 12, 14, and 16 mm |
| Base (L × W × T) | 435 × 119 × 16 mm |
| Tool weight | 325 g |
Which Bending Tool Do I Need?
What's in the Box
How to Bend Hard Tubing
Have rigid tubing, a heat gun, a matching silicone bending insert, a tube-cutting tool, and a chamfering tool on hand.
FAQ
Can I use the same bender for acrylic and PETG?
Yes. Use rigid acrylic or PETG with an outside diameter of 12, 14, or 16 mm.
Can I make two bends on a single tube?
Yes. Reposition the guide arms for the shape you need. The example above shows two right-angle bends on one tube.
Does the jig need to be bolted to a workbench?
It can sit on a stable work surface while you bend the tube.
Do I need a separate heat gun and bending insert?
Yes. The jig guides the tube after heating. Use a separate heat gun and a silicone insert sized for the tube’s inside diameter.
- Not responsible for any hardware damage. Use at your own risk.












