• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

PCI Slot Pass-Through Baffle for External Water Cooling – Bykski B-PCI-EM-X-V2, Dual G1/4

stars, based on ( 0 ) review
€26.38 piece
items available
Contact Us
FormulaMod Official Store
Bykski · B-PCI-EM-X-V2

PCI slot pass-through baffle for external water cooling

The Bykski B-PCI-EM-X-V2 is a pass-through bracket that connects the tubing inside a water-cooled PC to an external radiator loop. It mounts in an open rear PCI expansion slot on the case. Two G1/4 female ports on each side provide separate paths for coolant to leave and return to the case.

Fits
Open rear PCI case slot
Port thread
G1/4 female
Port spacing
26 mm center to center
Module material
Brass

Fits / Use With

  • ✓An open standard rear PCI expansion slot on the case
  • ✓G1/4 male fittings sized for your tubing

Design Highlights

Bykski B-PCI-EM-X-V2 angled rendering showing the two threaded openings on one face and the mounting tabs

Supply and return through one bracket

Two passages run through the brass module. You can connect the supply and return tubing at the same opening in the case.

Bykski B-PCI-EM-X-V2 mounting illustration showing the pass-through halves on either side of a rear case slot

Mounts at the rear of the case

The 304 stainless steel bracket takes the place of an unused expansion-slot cover. The modules sit on opposite sides of the bracket so the internal and external fittings can be reached from their respective sides.

Key Specifications

ModelB-PCI-EM-X-V2
ThreadG1/4 female
Pass-through paths2, with two threaded openings on each side
Module materialBrass
Bracket material304 stainless steel
ColorGunmetal gray
Overall dimensions (L × H × D)121.00 × 22.68 × 34.30 mm
Front height excluding mounting tab18.30 mm
Port spacing, center to center26.00 mm
Bracket plate thickness0.80 mm
Bykski B-PCI-EM-X-V2 dimension drawing with front and top views, port spacing, and bracket plate thickness

Manufacturer drawing. Dimensions are in millimeters.

Which Version Do I Need?

Choose by mounting point, how many tubing runs need to cross the case, and the module material.

Bykski B-PCI-EM-X-V2THIS PAGE
Choose this for a brass module on a stainless steel bracket that routes both lines through a rear expansion slot.
Choose this rear-slot pass-through if you want a POM module on a carbon steel bracket.
Choose this single-line pass-through if you have a suitable panel hole for a locknut-mounted fitting.

What's in the Box

1 × Bykski B-PCI-EM-X-V2 pass-through bracket assembly

Installation & Use

1
Remove the cover from an unused rear expansion slot.
2
If assembly is needed, fasten the first module half to the bracket, then align the seal and fasten the second half. Secure the bracket at the case’s slot mounting point.
3
Install G1/4 male fittings and connect the tubing on both sides, using one passage for supply and the other for return.
4
Leak-test the loop with the PC hardware unpowered. Check the connections on both sides of the bracket before powering the PC.

You’ll need tubing, matching G1/4 male fittings, and an external radiator loop.

Bykski B-PCI-EM-X-V2 exploded view of the two module halves, expansion-slot bracket and screws, alongside the assembled side view

Assembly drawing. The two module halves fit on opposite sides of the bracket.

FAQ

Do I need to drill a hole in the case?

Use an existing open rear PCI expansion-slot opening to mount the bracket.

Does it have two ports or four?

There are two G1/4 female ports on each side, for four fitting connections across two pass-through paths.

Can I use it with an external radiator?

Yes. Route the supply and return lines between the PC and the external radiator loop through the bracket.

What comes in the box?

One B-PCI-EM-X-V2 pass-through bracket assembly. Provide the tubing and matching G1/4 male fittings for your loop.

Notes
  • Use the dimension drawing to check clearance for your fittings and tubing on both sides of the slot before ordering.

FormulaMod Official Store

Recent Reviews
+