Bykski
Tesla V100 SXM2 Water Block with Backplate - Bykski N-TESLA-V100SXM2-32G-SR
Full-cover water block for NVIDIA Tesla SXM2 modules
The Bykski N-TESLA-V100SXM2-32G-SR replaces the stock cooler on supported NVIDIA Tesla V100 and P100 SXM2 modules. Its nickel-plated copper cold plate transfers heat from the GPU package and power delivery components to a custom liquid cooling loop. The block connects through two G1/4 ports and comes with a backplate.
Compatibility
Match the SXM2 module and its PCB layout.
- ✓NVIDIA Tesla V100 SXM2 16GB
- ✓NVIDIA Tesla V100 SXM2 32GB
- ✓NVIDIA Tesla P100 SXM2 16GB
Not compatible:
- ✗NVIDIA Tesla V100 PCIe cards
- ✗NVIDIA Tesla P100 PCIe cards
Before ordering, compare your exact module’s PCB and mounting-hole positions with the reference layout.
Design Highlights
Copper cold plate with jet microchannels
The nickel-plated T2 copper cold plate uses 0.3 mm jet microchannels to expose more surface area to the coolant.
Two ports on the face of the block
Both ports take G1/4 fittings. Match the fittings to your tubing size and use the inlet shown in the flow diagram.
How to identify the inlet
With the Bykski badge on the left as pictured, the blue circle marks the upper port. Connect the incoming coolant line there.
Key Specifications
| Model | N-TESLA-V100SXM2-32G-SR |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Cold plate thickness | 9.8 mm |
| Other block material | 304 stainless steel |
| Finish | Gunmetal |
| Dimensions (L × W × H) | 140 × 79.4 × 27 mm |
| Net weight | 0.88 kg |
| Port threads | 2 × G1/4 female |
| Cooling method | Jet impingement |
| O-ring | EPDM |
| Maximum working pressure | 4 bar |
| Working temperature | −20°C to 60°C |
| Bykski-listed fluids for the block | Water, ethylene glycol, propylene glycol, fluorinated fluid, mineral oil |
Which Version Do I Need?
Check the form factor on your V100 before choosing a block.
What's in the Box
G1/4 stop plugs are not included. If you need to cap an unused port, supply your own G1/4 stop plug.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, matching tubing, and coolant.
FAQ
Will this water block fit my Tesla V100 PCIe card?
The fit list is limited to the specified SXM2 modules. For the V100 32GB FHHL PCIe version, use the PCB comparison in the linked FHHL listing above.
Does the same water block fit the P100?
Bykski lists the NVIDIA Tesla P100 SXM2 16GB. Check that its PCB matches the reference layout.
What fittings do I need?
Use G1/4 male fittings sized for your tubing.
What thermal pad thickness does the installation diagram show?
The diagram specifies 1.5 mm pads for the two outer contact areas.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The product does NOT include printed instructions. See Compatibility for the assembly diagram and Installation & Use for thermal pad placement.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.













