Bykski
RTX 4070 Ti Water Block for MSI SUPRIM X 12G, Bykski N-MS4070TITRIO-X-V2 with Backplate & 5V ARGB Controller
Full-cover water block for MSI RTX 4070 Ti SUPRIM X 12G
The Bykski N-MS4070TITRIO-X-V2 replaces the stock cooler on the MSI GeForce RTX 4070 Ti SUPRIM X 12G with the matching PCB layout. Its nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators in a custom liquid cooling loop. This set includes an aluminum backplate and a 5V ARGB lighting controller.
Compatibility
Bykski lists this MSI custom PCB layout.
- ✓MSI GeForce RTX 4070 Ti SUPRIM X 12G
Before ordering, verify the exact model on your card and match its PCB layout to Bykski’s reference layout.
Design Highlights
Full-cover copper cold plate
The cold plate draws heat from the GPU core, memory, and voltage regulators. A jet microchannel section sits over the GPU area.
Clear acrylic cover and G1/4 terminal
The clear cover leaves the coolant path visible. Use G1/4 fittings for the inlet and outlet and seal unused openings with the supplied stop plugs.
Passive aluminum backplate
The included black aluminum backplate mounts behind the PCB, outside the coolant path.
Key Specifications
| Model | N-MS4070TITRIO-X-V2 |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Cover | Clear acrylic |
| Backplate | Black aluminum |
| Cooling coverage | GPU core, memory, and VRM |
| Port thread | G1/4 inlet and outlet |
| Block (L × W × T) | 239.91 × 165.88 × 26.25 mm |
| Backplate (L × W × T) | 239.84 × 135.40 × 6.00 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
| Lighting controller | Included |
Which Version Do I Need?
Choose the water block by the exact model on your graphics card. MSI SUPRIM X and ASUS ProArt use different blocks.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
Use a custom loop with a pump, reservoir, radiator and fans, G1/4 tubing fittings, tubing, and coolant.
FAQ
Which RTX 4070 Ti PCB does this water block fit?
Bykski lists the MSI GeForce RTX 4070 Ti SUPRIM X 12G. Match your card’s full model name and PCB layout before ordering.
What fittings do I need for the loop?
Use G1/4 fittings sized for your tubing. Use the included stop plugs to close unused terminal openings.
Can I use the lighting without a motherboard ARGB header?
Yes. The included controller can run the LEDs independently. For motherboard sync, use a compatible Bykski sync cable to connect the block’s lighting lead to a 5V 3-pin ARGB header. Avoid the 12V 4-pin RGB header.
Does coolant flow through the backplate?
The backplate mounts behind the PCB. Coolant circulates through the block on the front of the card.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













