Bykski
RTX 4070 Ti Water Block for ASUS ProArt OC, Bykski N-AS4070TIPR-X with Backplate
Full-cover GPU water block for select ASUS ProArt cards
The Bykski N-AS4070TIPR-X replaces the stock cooler on the ASUS ProArt GeForce RTX 4070 Ti OC 12GB in a custom liquid cooling loop. Its full-cover copper cold plate cools the GPU core, memory, and voltage regulators. The block comes with a black aluminum backplate and uses G1/4 ports and 5V 3-pin ARGB lighting.
Compatibility
Match your exact ASUS model number.
- ✓ASUS ProArt GeForce RTX 4070 Ti OC Edition 12GB (PROART-RTX4070TI-O12G)
- ✓ASUS ProArt GeForce RTX 4080 SUPER OC Edition 16GB (PROART-RTX4080S-O16G)
Before ordering, confirm the model number on your card and verify its PCB layout and revision with FormulaMod support.
Design Highlights
One cold plate cools the GPU, memory, and VRM
The nickel-plated copper plate has raised contact surfaces for the GPU core, memory, and power delivery components. Coolant carries heat from the plate into the loop.
Jet microchannels
The 0.3 mm gaps between the fins give coolant a path through the area directly above the GPU core.
5V addressable lighting
The included 5V ARGB strip lights the clear acrylic top. Match it to a 5V 3-pin ARGB header or a compatible 5V controller.
Key Specifications
| Model (SKU) | N-AS4070TIPR-X |
|---|---|
| Cold plate | Nickel-plated high-purity T2 copper |
| Top | Clear PMMA acrylic |
| Backplate | Black aluminum, outside the coolant path |
| Cooling coverage | GPU core, memory, and VRM |
| Inlet and outlet thread | G1/4 |
| Microchannel gap | 0.3 mm |
| Water block (L × W × T) | 219.82 × 145.92 × 26.97 mm |
| Backplate (L × W × T) | 219.82 × 115.92 × 6.00 mm |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump and reservoir, radiator and fans, G1/4 fittings, matching tubing, and coolant.
FAQ
How do I know if this RTX 4070 Ti water block fits my card?
Check for ASUS model number PROART-RTX4070TI-O12G and verify the PCB layout and revision before ordering.
Which fittings fit the water block?
Use G1/4 fittings that match your tubing and seal the unused ports with the supplied stop plugs.
Will a 12V 4-pin RGB header power the lighting?
Use a 5V 3-pin ARGB header or a compatible 5V controller. A 12V RGB header can damage the LEDs.
Does the included backplate carry coolant?
The black aluminum backplate mounts behind the PCB, outside the coolant path.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.














