Bykski
ASUS Dual RTX 4060 Ti OC 8GB Water Block with Backplate | Bykski N-AS4060TIDUAL-X
Full-cover water block for ASUS Dual RTX 4060 Ti OC 8GB
The Bykski N-AS4060TIDUAL-X replaces the stock cooler on a supported ASUS Dual GeForce RTX 4060 Ti OC 8GB. Its nickel-plated copper cold plate transfers heat from the GPU, memory, and voltage regulators into a custom liquid cooling loop. The kit includes a black aluminum backplate that mounts behind the card.
Compatibility
Supported ASUS Dual PCB
- ✓ASUS Dual GeForce RTX 4060 Ti OC Edition 8GB (DUAL-RTX4060TI-O8G)
Not compatible:
- ✗ASUS Dual GeForce RTX 4060 Ti OC Edition 16GB (DUAL-RTX4060TI-O16G)
Before ordering, check your card’s model number. Compare the entire PCB and its mounting holes with the bare-board photo in the product gallery. If you’re unsure, ask us to confirm your PCB.
Design Highlights
Clear acrylic top with G1/4 ports
The clear cover exposes the coolant channels. The inlet and outlet take G1/4 fittings sized for the tubing in your loop.
Jet microchannels over the GPU
Coolant passes through fine channels above the GPU contact area. The full-cover cold plate also draws heat from the memory and voltage regulators.
Black aluminum backplate
The included passive backplate mounts behind the PCB. Coolant stays in the water block.
Key Specifications
| Model (SKU) | N-AS4060TIDUAL-X |
|---|---|
| Cold plate | Nickel-plated copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU, memory, and VRM |
| Port thread | G1/4 inlet and outlet |
| Water block (L × W × T) | 170.00 × 145.61 × 26.15 mm |
| Backplate (L × W × T) | 170.00 × 115.53 × 6.00 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Start with the model on your card’s label, then check the PCB listed for that block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the loop, supply a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings that match your tubing.
FAQ
Is the ASUS Dual RTX 4060 on the fit list?
Bykski’s fit list does not include the ASUS Dual RTX 4060 OC 8GB (DUAL-RTX4060-O8G). Choose a block that lists your full card model and matches its PCB.
Does the block include a backplate?
Yes. It includes a passive black aluminum backplate that mounts behind the PCB.
Which fittings should I use?
Use G1/4 fittings sized for your tubing and close unused ports with the included stop plugs.
Which RGB header powers the lighting?
Use a compatible adapter for a 5V 3-pin ARGB motherboard header, or connect the lighting to a compatible 5V ARGB controller. A 12V 4-pin RGB header can damage the LEDs.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.













