Bykski
RTX 3090 Strix Water Block with Active Backplate | Bykski N-AS3090STRIX-TC-V3
Full-cover GPU water block with an active backplate
The Bykski N-AS3090STRIX-TC-V3 is a full-cover water block for a custom loop on select ASUS ROG Strix RTX 3090, 3080 Ti, and 3080 cards. Its copper cold plate cools the GPU, memory, and voltage regulators on the front. A bridge routes coolant through the active backplate to cool the rear of the board.
Compatibility
Fits these ASUS ROG Strix PCB layouts with three PCIe power connectors.
- ✓ROG-STRIX-RTX3090-24G-GAMING
- ✓ROG-STRIX-RTX3080TI-O12G-GAMING
- ✓ROG-STRIX-LC-RTX3080TI-12G-GAMING
- ✓ROG-STRIX-RTX3080-10G-GAMING
- ✓ROG-STRIX-RTX3080-O12G-GAMING
Not compatible:
- ✗ASUS TUF Gaming PCB layouts
Before ordering, check the full ASUS model code and compare the bare PCB with Bykski’s layout for this water block. Check mounting holes, component placement, and power connector locations.
Design Highlights
Coolant runs through the backplate
The bridge connects the front block to the copper waterway in the backplate. On the listed RTX 3090, the backplate draws heat from memory on the rear of the PCB.
Key Specifications
| Model | N-AS3090STRIX-TC-V3 |
|---|---|
| Cold plate | Electroplated T2 high-purity copper |
| Front cover | Clear acrylic |
| Active backplate | Electroplated copper waterway |
| Port thread | G1/4 inlet and outlet |
| Front block (L × W × T) | 248.68 × 158.10 × 22.65 mm |
| Active backplate (L × W × T) | 267.03 × 128.69 × 17.25 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Use the model code on your graphics card to choose between the Strix and TUF Gaming blocks.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 tubing fittings, tubing, and coolant.
FAQ
Does this fit an ASUS ROG Strix RTX 3080 Ti?
The RTX 3080 Ti Gaming OC and the RTX 3080 Ti Strix LC 12GB models listed in Compatibility are supported. Check the full model code and PCB layout before ordering.
Can I plug the 3-pin ARGB cable into a 4-pin RGB header?
Use a 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage the lighting.
What does the active backplate cool?
Coolant flows through the backplate to remove heat from the rear of the PCB. On the listed RTX 3090, that includes the rear memory.
Which fittings and ports should I use?
Use G1/4 tubing fittings and follow the bridge’s inlet and outlet markings. Bykski illustrates a lower inlet and upper outlet, with the unused ports plugged.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













