• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 3090 TC GPU Water Block Bridge | Bykski B-L2-2WAY-TC, B-L3-2WAY-TC, B-L3-4WAY-TC, B-L4-4WAY-TC

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · TC Multi-GPU Bridges

One coolant bridge for two or four GPU water blocks

This Bykski acrylic bridge connects two or four compatible RTX 3090 GPU water blocks with Bykski TC active backplates in a custom liquid cooling loop. The bridge replaces the blocks’ original terminals so coolant can pass between them without separate tubing runs. Choose the bridge by the exact water block model and measure the motherboard slot spacing before ordering.

Fits
Select Bykski RTX 3090 TC blocks
Block count
2 or 4
Loop ports
G1/4
Material
Clear acrylic

Fits These Bykski Water Blocks

Match the exact water block part number, including its revision suffix.

  • ✓B-L2-2WAY-TC (2 blocks) or B-L3-4WAY-TC (4 blocks)
    • N-AS3090STRIX-TC-V2
    • N-AS3090TUF-TC
    • N-IG3090VXOC-TC
    • N-MS3090TRIO-TC
    • N-RTX3090FE-TC
    • N-PT3090GR-TC
    • N-GY3090CL-TC
  • ✓B-L3-2WAY-TC (2 blocks) or B-L4-4WAY-TC (4 blocks)
    • N-RTX3090H-TC-V2
    • N-GV3090GMOC-TC
    • N-GV3090AORUS-TC
    • N-GV3090AORUSXE-TC
    • N-ST3090TQ-TC
    • N-ST3090PGF-TC
    • N-ST3090XG-TC
    • N-EV3090FTW3-TC
    • N-GY3090GAMER-TC
    • N-IG3090UL-TC
    • N-IG3090ZF-TC
    • N-ICH3090-TC
    • N-MS3090VES-TC

Not compatible:

  • ✗N-GY3090HOF-TC with the standard B-L3-2WAY-TC or B-L4-4WAY-TC.

Measure the spacing between the PCIe slots you plan to use. If it exceeds 40 mm, contact customer service before ordering to check whether a custom bridge is needed.

Confirm the specific combination if you plan to mix water block models.

Design Highlights

Bykski B-L2-2WAY-TC clear acrylic bridge showing the internal coolant channels and beveled edges

Visible coolant channels

The clear acrylic body lets you see the coolant channels. The bridge connects to your loop through G1/4 ports.

Bykski B-L3-4WAY-TC bridge mounted on a stack of four GPU water blocks

Bykski’s four-block installation example.

Direct connection between blocks

The bridge mounts in place of the original terminals and saves the space that tubing would take between the cards.

Key Specifications

Material and finishClear machined acrylic (PMMA)
Loop fitting threadG1/4
PCIe slot spacing40 mm nominal. Measure the slots you will use.
B-L2-2WAY-TC2 blocks · 87.34 × 79 × 24 mm (L × W × T)
B-L3-2WAY-TC2 blocks · 90.34 × 79 × 24 mm (L × W × T)
B-L3-4WAY-TC4 blocks · 171.62 × 79 × 24 mm (L × W × T)
B-L4-4WAY-TC4 blocks · 168.62 × 79 × 24 mm (L × W × T)
Bykski B-L4-4WAY-TC dimensional drawing showing the face and side of the acrylic bridge

Bykski’s B-L4-4WAY-TC drawing. Dimensions are in millimeters.

Which Version Do I Need?

Use the fit list to find the matching bridge pair, then choose the part number for your block count.

Bykski TC multi-GPU bridgeTHIS PAGE
Choose one of the two- or four-block versions on this page for the TC water block models listed above.
Compare this separate three-block bridge if you have three water blocks, and verify its fit for your build.
Compare this 90-degree rotary terminal if you want to change the tubing direction on a single water block.

What's in the Box

1 × acrylic bridge in the selected version

Installation & Use

1
Confirm the water block part numbers, block count, and PCIe slot spacing. Remove the original terminal from each water block.
2
Seat the sealing rings in the grooves on the underside of the bridge.
3
Align the bridge with the water blocks and tighten the mounting screws in sequence.
4
Connect the loop with G1/4 fittings. Seal unused ports with G1/4 stop plugs.
5
Leak-test the assembled loop with the graphics cards unpowered. Bykski recommends a 24-hour test.

Have the matching TC water blocks and backplates, the correct bridge seals and screws, tubing with matching G1/4 fittings, and stop plugs ready.

Bykski B-L4-4WAY-TC exploded installation illustration with screws above the acrylic bridge and sealing rings above four water blocks

Bykski’s B-L4-4WAY-TC installation illustration shows how the seals sit between the bridge and the blocks.

FAQ

How do I pick a version for my RTX 3090 build?

Find your exact Bykski water block part number in the fit list, then select the bridge for two or four blocks. Measure the PCIe slots you plan to use.

Do I keep the original water block terminals?

Remove the original terminals before fitting the bridge. The bridge takes their place across the connected blocks.

Can I connect hard or soft tubing?

Either works at the loop connections. Use G1/4 fittings sized for the tubing you have.

How do I seal unused ports?

Use G1/4 stop plugs to seal any unused ports before leak-testing the loop.

Notes
  • 1. The GPU blocks and graphics cards in the detailed picture are only for reference and product function display.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+