Bykski
M.2 NVMe SSD Water Block for 2280 Drives – Bykski B-NVME-SL
Water-cool your M.2 NVMe SSD in a custom loop
The Bykski B-NVME-SL is a water block for an M.2 2280 NVMe SSD. Its copper cold plate transfers heat from the drive into a custom liquid cooling loop. You can see the coolant channel through the clear acrylic top. Two G1/4 ports connect the block to your loop.
Compatibility
For M.2 2280 NVMe SSDs
Before ordering, check your motherboard’s M.2 slot and mounting point. Allow space above the block for the fittings and tubing.
Design Highlights
Clear top with two G1/4 ports
The coolant channel is visible through the acrylic. Both fittings attach from above.
Copper contact plate
A thermal pad sits between the SSD and the cold plate to pass heat into the block. The separate bottom bracket holds the drive in place.
Key Specifications
| Model (SKU) | B-NVME-SL |
|---|---|
| SSD form factor | M.2 2280 NVMe |
| Top | Clear acrylic |
| Cold plate | Copper |
| Ports | 2 × G1/4 |
| Block (L × W × H) | 72 × 24 × 24 mm |
Which Version Do I Need?
What's in the Box
Installation & Use
You’ll need a compatible SSD and a custom loop with a pump, radiator, coolant, G1/4 fittings, and matching tubing.
FAQ
What size M.2 NVMe SSD fits the B-NVME-SL?
It is for the M.2 2280 form factor. Check that your motherboard has a compatible M.2 slot and mounting point.
What fittings do the ports use?
Both ports take G1/4 fittings. Match the tubing to the fittings you use.
Can I use this water block on its own?
It needs a custom liquid cooling loop with a pump, radiator, tubing, fittings, and coolant.
Does the block come with mounting hardware?
Yes. The block comes with the bottom bracket and mounting screws.












