Bykski
Manli Gallardo RTX 5090D OC 32GB GPU Water Block with Backplate and ARGB | Bykski N-ML5090GR-X
Full-cover water block for the Manli Gallardo RTX 5090D OC
The Bykski N-ML5090GR-X replaces the stock cooler on the Manli Gallardo GeForce RTX 5090D OC 32GB for use in a custom liquid cooling loop. Its T2 copper cold plate draws heat from the GPU core, memory, and voltage regulators. The bundle includes a black aluminum backplate and a 5V ARGB lighting controller.
Compatibility
Bykski lists this graphics card for the N-ML5090GR-X.
- ✓Manli Gallardo GeForce RTX 5090D OC 32GB (Starship)
Check your card label for Manli model M-N509DGO/D732G-M3626. Before ordering, compare your PCB layout and mounting holes with the board shown in Bykski’s installation drawing below.
Design Highlights
Coolant path across the cold plate
Bykski specifies a 0.3 mm jet microchannel design with up to 56 channels.
5V addressable lighting
The clear window shows the coolant channels and the built-in ARGB lighting. Use the included controller if you prefer to run the lighting without motherboard sync.
Separate aluminum backplate
The backplate screws onto the rear of the graphics card PCB. The coolant connections are on the water block.
Key Specifications
| Model | N-ML5090GR-X |
|---|---|
| Coverage | GPU core, memory, and voltage regulators |
| Cold plate | T2 copper |
| Copper plate | 158.451 mm long × 6 mm thick |
| Copper under the channels | 0.35 mm at the point shown in Bykski’s cross section |
| Microchannels | 0.3 mm jet microchannel design, up to 56 channels |
| Channel surface area | 10,962.06 mm² |
| Backplate | Black aluminum |
| Water block (L × W × D) | 254.36 × 127.82 × 29.59 mm |
| Backplate (L × W × D) | 254.35 × 127.82 × 22.60 mm |
| Inlet and outlet thread | G1/4 |
| Lighting | 5V 3-pin ARGB (RBW), controller included |
Which Version Do I Need?
Check the exact model on your card label before choosing a Gallardo water block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the loop, you’ll also need a pump, reservoir, radiator, radiator fans, G1/4 tubing fittings, tubing, and coolant.
FAQ
Which RTX model is this water block for?
This version is for the Manli Gallardo GeForce RTX 5090D OC 32GB. Check the Manli model number and compare the PCB layout before ordering.
What fittings does the block use?
The inlet and outlet use G1/4 threads. Choose fittings that also match the type and size of your tubing.
Can I run the lighting without motherboard sync?
Yes. The included lighting controller can run the block’s 5V ARGB lighting on its own.
Where do the thermal pads go?
Place the supplied pads on the memory and power components marked in Bykski’s installation drawing.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.














