Bykski
RTX 3090 Ti Water Block for Gigabyte Gaming OC 24G, Bykski N-GV3090TIGMOC-X with Backplate
Full-cover water block for Gigabyte RTX 3090 Ti Gaming OC 24G
The Bykski N-GV3090TIGMOC-X replaces the stock cooler on the Gigabyte GeForce RTX 3090 Ti Gaming OC 24G for use in a custom liquid cooling loop. Its copper cold plate cools the GPU, memory, and voltage regulators. The block connects through G1/4 ports and comes with a passive aluminum backplate.
Compatibility
PCB match required.
- ✓Gigabyte GeForce RTX 3090 Ti Gaming OC 24G (GV-N309TGAMING OC-24GD)
Before ordering, check the model number on your card and compare the full PCB layout and mounting holes with the board photo in the product gallery. Contact support if you need help confirming the match.
Design Highlights
One block cools the GPU, memory, and VRM
The cold plate picks up heat from the GPU core, graphics memory, and voltage regulators. Coolant carries that heat away through the block.
Jet microchannels
Coolant passes between the closely spaced fins over the GPU contact area. The clear acrylic top leaves the flow path visible.
5V addressable lighting
The included RBW strip lights the clear top. Use a compatible 5V ARGB controller or an adapter for a 5V 3-pin motherboard header. A 12V RGB header can damage the strip.
Key Specifications
| Manufacturer model | N-GV3090TIGMOC-X |
|---|---|
| Cold plate | High-purity copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, graphics memory, and voltage regulators |
| Inlet and outlet thread | G1/4 |
| Water block (L × W × T) | 229.87 × 167.13 × 23.25 mm |
| Backplate (L × W × T) | 229.87 × 136.91 × 6.00 mm |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
Start with the model on your card’s label. Each of these blocks is made for a specific PCB layout.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, you also need a pump and reservoir, a radiator with fans, tubing, matching G1/4 fittings, and coolant.
FAQ
How do I check whether this RTX 3090 Ti water block fits my card?
Check for Gigabyte GeForce RTX 3090 Ti Gaming OC 24G and the part number GV-N309TGAMING OC-24GD on the card label. Compare your PCB with the board photo in the product gallery before ordering.
What fittings does the block take?
It takes G1/4 fittings at the inlet and outlet. Choose fittings made for the tubing used in your loop.
Does the backplate need its own coolant connection?
The included black aluminum backplate is passive. Coolant flows through the front block.
Can I connect the lighting to a 12V RGB header?
Use a compatible 5V ARGB controller or an adapter to a 5V 3-pin motherboard ARGB header. A 12V RGB connection can damage the strip.
What else do I need to water-cool my 3090 Ti?
To build the loop, you’ll need a pump and reservoir, a radiator with fans, G1/4 fittings, tubing, and coolant.
- This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
- Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.
- Not responsible for any damage caused by or when using this product. Please use at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.














