• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS TUF RTX 3080 Ti / 3080 / 3090 Water Block with Active Backplate, Bykski N-AS3090TUF-TC-V2

stars, based on ( 0 ) review
€177.74 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-AS3090TUF-TC-V2

Full-cover GPU water block with active backplate

The Bykski N-AS3090TUF-TC-V2 replaces the stock cooler on select ASUS TUF Gaming GeForce RTX 3080, 3080 Ti, and 3090 cards in a custom liquid cooling loop. The front block cools the GPU die, memory, and power delivery components. A bridge carries coolant between the front block and the active backplate.

Fits
Select ASUS TUF Gaming cards
Backplate
Liquid-cooled
Cold plate
T2 copper
Lighting
5V 3-pin ARGB

Compatibility

Bykski lists the PCB layouts for these ASUS TUF Gaming GeForce cards.

  • ✓RTX 3080 Ti 12GB (TUF-RTX3080TI-12G-GAMING)
  • ✓RTX 3080 Ti 12GB OC (TUF-RTX3080TI-O12G-GAMING)
  • ✓RTX 3080 10GB (TUF-RTX3080-10G-GAMING)
  • ✓RTX 3090 24GB (TUF-RTX3090-24G-GAMING)

Before ordering, match your exact ASUS model number and verify the PCB layout against Bykski’s compatibility reference.

ASUS TUF-RTX3090-24G-GAMING angled front view with the original three-fan cooler

ASUS TUF Gaming RTX 3090 24GB shown with its original air cooler.

Key Specifications

ModelN-AS3090TUF-TC-V2
Front block coverageGPU die, graphics memory, and power delivery components
Cold plateT2 copper
Cooling channels0.3 mm jet microchannels
BackplateActive liquid cooling with connecting bridge
Lighting connector5V 3-pin addressable RGB (RBW)

What's in the Box

1 × full-cover GPU water block1 × active backplate1 × connecting bridge2 × G1/4 stop plugsMounting hardwareThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the graphics card’s original cooler and clean off the old thermal materials.
2
Place thermal pads at the contact points shown for your PCB and apply your own thermal paste to the GPU die.
3
Align the mounting holes and secure the front block and backplate.
4
Place the seals as shown in Bykski’s assembly diagram and screw down the bridge without overtightening.
5
Connect the assembly to the loop and leak-test it before powering the graphics card.

You also need a pump, radiator, fittings, tubing, and coolant.

FAQ

Which ASUS TUF RTX 3080 Ti cards fit this water block?

Bykski lists the 12GB Gaming and 12GB Gaming OC layouts. Verify the exact ASUS model number and PCB before ordering.

How does the active backplate connect to the loop?

The included bridge links the coolant channels in the front block and backplate.

Which RGB header does this block use?

Use a compatible 5V 3-pin addressable RGB connection. A 12V RGB header can damage the lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.

FormulaMod Official Store

Recent Reviews
+