Bykski
RTX 5090 Founders Edition GPU Water Block with Backplate – Bykski N-RTX5090FE-SR
Full-cover water block for the RTX 5090 Founders Edition
The Bykski N-RTX5090FE-SR is a full-cover GPU water block for the NVIDIA GeForce RTX 5090 Founders Edition. It replaces the stock cooler and uses your custom loop to cool the GPU die, memory, and power stages. The block has a T2 copper cold plate, G1/4 ports, and an included aluminum backplate.
Compatibility
Bykski lists one compatible PCB layout.
- ✓NVIDIA GeForce RTX 5090 Founders Edition (FE PCB)
Not compatible:
- ✗RTX 5090 Turbo and other non-Founders Edition PCB layouts
Before ordering, verify the exact card model and compare its PCB and mounting holes with the board shown.
Design Highlights
One cold plate for the GPU, memory, and power stages
The T2 copper cold plate has raised contact areas for the card’s components. Inside the block, 0.3 mm jet microchannels guide coolant across the area above the GPU die.
Aluminum backplate for the rear of the card
The included aluminum backplate bolts to the rear of the PCB and sits outside the coolant path.
G1/4 inlet and outlet at the end
Use G1/4 fittings on the block and match the tubing side of each fitting to your tubing. Follow the inlet and outlet markings on the terminal when you route the loop.
Key Specifications
| Model | N-RTX5090FE-SR |
|---|---|
| Cold plate | T2 copper |
| Backplate | Aluminum, outside the coolant path |
| Cooling coverage | GPU die, memory, and power stages |
| Port thread | G1/4 female |
| Jet microchannel width | 0.3 mm |
| Block (L × W × T) | 234.35 × 121.82 × 22.70 mm |
| Backplate (L × W × T) | 222.16 × 121.82 × 10.96 mm |
| Net weight | 1.5 kg |
| Maximum working pressure | 2 bar |
| Working temperature | −20 to 60 °C |
| Lighting | None |
Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, you also need a pump, reservoir, radiator, G1/4 fittings, tubing, and compatible coolant.
FAQ
Will this water block fit any RTX 5090?
It fits the NVIDIA GeForce RTX 5090 Founders Edition PCB. Check your card’s exact model and board layout before ordering.
Which fittings do I need?
Use fittings with G1/4 male threads on the block. Choose the tubing connection to match your tubing.
Does coolant flow through the backplate?
Coolant flows through the water block. The included aluminum backplate sits outside the coolant path.
Does this version have RGB lighting?
This configuration is unlit and needs no lighting connection.
Where do the thermal pads go?
Place the thermal pads on the areas marked in red on the front and rear PCB diagrams. Apply your own thermal paste to the GPU die, marked in blue.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.













