• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 5090 Founders Edition 360 mm AIO Liquid Cooler – Bykski B-FRD-RTX5090FE

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-RTX5090FE

RTX 5090 Founders Edition AIO liquid cooler

The Bykski B-FRD-RTX5090FE is an all-in-one liquid cooler for the NVIDIA GeForce RTX 5090 Founders Edition with 32 GB of GDDR7 memory. It replaces the card’s factory air cooler with a full-cover water block and backplate. In the standard kit, an inline pump sends coolant to a case-mounted radiator, so you can liquid-cool the card without building a custom loop.

Fits
RTX 5090 Founders Edition
Standard radiator
360 mm aluminum
Coverage
GPU, memory, and power stages
Loop
Assembled and pre-filled

Compatibility

For the Founders Edition PCB

  • ✓NVIDIA GeForce RTX 5090 Founders Edition (32 GB GDDR7)

Match the location of the GPU, power connector, and mounting holes to the bare-board photo. Verify your exact PCB layout before ordering.

Bykski B-FRD-RTX5090FE reference photo of the bare NVIDIA GeForce RTX 5090 Founders Edition PCB, with its angled power connector and separate display connector board

NVIDIA GeForce RTX 5090 Founders Edition board with the stock cooler removed.

Design Highlights

Bykski B-FRD-RTX5090FE standard kit showing the three radiator fans, GPU block, and connected tubing

Case-mounted radiator

The standard kit uses a 360 mm aluminum radiator and three 120 mm fans. The radiator is 396 mm long, so check the space around the mount as well as the mounting pattern.

Bykski B-FRD-RTX5090FE close-up illustration of parallel fins in the cold plate

Copper cold plate

A nickel-plated T2 copper cold plate draws heat from the GPU, memory, and power stages. Coolant passes through 0.3 mm jet microchannels.

Bykski B-FRD-RTX5090FE angled view showing the cylindrical inline pump between the block and radiator

Pump in the tubing

The pump sits between the radiator and block, with braided EPDM tubing on either side. The loop comes assembled and filled.

Key Specifications

Standard kit modelB-FRD-RTX5090FE-360
Cold plateNickel-plated T2 copper
Microchannels0.3 mm jet microchannels
CoverageGPU, memory, and power stages
Radiator360 mm mount, 396 mm overall length, 38 mm radiator depth, aluminum with 12 coolant channels
Depth with fans63 mm
Fans3 × 120 mm
Inline pump7,000 RPM, 450 L/h flow, 7 m head
TubingBraided EPDM
Bykski B-FRD-RTX5090FE standard 360 mm radiator and tube routing dimension drawing with fan depth

Standard 360 mm kit layout. All dimensions are in millimeters. The 480 mm measurement shows the kit laid out straight.

Which Version Do I Need?

Match the Founders Edition PCB first, then choose the cooling setup that fits your build.

Bykski B-FRD-RTX5090FE-360 AIOTHIS PAGE
Choose this kit to convert an RTX 5090 Founders Edition to liquid cooling with a dedicated pump and radiator. Check your case for a 360 mm mount and enough room for the radiator and fans.
Standalone GPU water block
Choose a block made for the Founders Edition PCB if you plan to connect it to a custom loop.

For any other radiator option, confirm the case clearance and kit contents with us before ordering.

What's in the Box

Assembled GPU block and backplate with 360 mm radiator, inline pump, and tubing3 × 120 mm fans1.5 mm thermal padsMounting hardware

Contents shown for the standard 360 mm kit.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Check the radiator mount and tubing route before taking the card apart. The diagram shows a top-mounted radiator.
2
Power off the PC, remove the card, and take off the factory cooler. Clean away the old thermal material and check that the mounting holes line up.
3
Apply thermal pads at the memory and power-stage contact points and spread GPU thermal paste on the chip. Fit the block and backplate with the mounting hardware.
4
Reinstall the card and mount the radiator and fans. Route the tubing with room for smooth bends.
5
Connect the pump and fans to their specified power connections. At startup, verify that the pump and fans are running.

You also need a case with space for the radiator, fans, and tubing, plus your own GPU thermal paste.

Bykski B-FRD-RTX5090FE installation illustration showing the radiator at the top of a PC case and the tubing routed down to the graphics card

Example with the radiator mounted at the top of the case.

FAQ

Can I use this AIO on any RTX 5090?

The block fits the NVIDIA GeForce RTX 5090 Founders Edition PCB. Use the bare-board photo to check the layout before ordering.

Will the 360 mm kit fit my case?

Check for a 360 mm radiator mount, 396 mm of room along the mount, and 63 mm of depth for the radiator and fans together. Leave room for the tubing to bend toward the card.

Do I need a separate pump or coolant?

The standard kit comes with the pump already connected and the loop filled. You can install it without buying a pump or filling the loop.

Where is the pump mounted?

On the standard kit, it sits inline on the tubing between the radiator and the GPU block. Leave a clear path for it when routing the tubing.

Notes
  • For any questions, please contact customer service.

FormulaMod Official Store

Recent Reviews
+