• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Corsair 5000D Distro Plate Kit – Bykski RGV-COS-5000D-P, 5 V ARGB

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-COS-5000D-P

Corsair 5000D distro plate kit for a CPU and single-GPU loop

The Bykski RGV-COS-5000D-P distro plate kit is built for a custom hardline loop in the Corsair 5000D PC case. The clear acrylic plate combines the coolant reservoir, DDC pump mount, and channels that connect the CPU block, graphics card block, and radiator. Provide your CPU and graphics card models so we can match the water blocks to your hardware.

Fits
Corsair 5000D
Loop
CPU + one GPU
Plate ports
G1/4
Lighting
5 V 3-pin ARGB

Compatibility

Check the exact case and water blocks before ordering.

  • ✓Corsair 5000D

Confirm the case edition on its label. Send your CPU model and socket, plus the full graphics card model and PCB revision, so we can match the two blocks.

Bykski RGV-COS-5000D-P installed in a white Corsair 5000D with hard tubing between the plate, blocks, and top radiator

Bykski’s example build in the Corsair 5000D.

Design Highlights

Bykski RGV-COS-5000D-P clear distribution plate with visible coolant channels and a finned black pump housing

Route the loop through one plate

The clear acrylic lets you see the reservoir and coolant channels. A DDC pump mounts directly to the plate, and the G1/4 ports connect the plate to the rest of the loop.

Bykski RGV-COS-5000D-P acrylic distribution plate with a multicolor addressable lighting effect

5 V addressable lighting

The Bykski RBW light strip illuminates the edge of the acrylic. Use a 5 V 3-pin ARGB connection and keep the strip off 12 V 4-pin RGB headers.

Key Specifications

Distribution plateBykski RGV-COS-5000D-P
Kit SKURGV-COS-5000D-P_Kits
Plate materialClear PMMA acrylic
Plate size (L × W × T)353 × 123 × 30.5 mm, plate only
Port threadG1/4
Pump typeDDC
Plate lighting5 V 3-pin ARGB (Bykski RBW)
Reference radiator360 mm class, 30 mm thick
Reference hard tubing14 mm outside diameter
Bykski RGV-COS-5000D-P face and edge dimension drawing showing 353, 123, and 30.5 mm

Bykski’s plate drawing. Dimensions are in millimeters.

Which Version Do I Need?

Choose based on which loop components you already have.

RGV-COS-5000D-P Distro Plate KitTHIS PAGE
Choose the kit to build a CPU and single-GPU loop around the plate, with a DDC pump and blocks selected for your hardware.
Choose the 5 V ARGB plate if you already have the rest of the loop or want to source it separately. This option ships without a pump.

What's in the Box

1 × acrylic distribution plate1 × DDC pump1 × radiator1 × CPU water block1 × full-cover GPU water blockFansHard tubingHardline compression fittings90° rotary elbowsExtensionsStop plugsDrain valvePressure exhaust valveLighting controllerMounting hardwareAdjustment moduleLighting adapter cable

This is Bykski’s reference kit list. Confirm the final parts and quantities when you provide your CPU and graphics card details.

Installation & Use

1
Confirm the two water blocks, then position the plate, radiator, fans, and blocks in the case to check tube alignment.
2
Secure the distro plate through its rear metal mounting plate. If the pump arrives separately, fit the seal and pump as shown in Bykski’s assembly diagram.
3
Measure, cut, and deburr each tube. Use fittings that match the tube’s outside diameter and follow the routing diagram for your layout.
4
Fill with PC coolant and power only the pump while the loop fills. Keep coolant in the reservoir so the pump stays wet, then check every joint for leaks before powering the rest of the system.

Have your Corsair 5000D, PC coolant, and hard-tube cutting and deburring tools ready.

Bykski RGV-COS-5000D-P routing drawing with hard lines from the side-mounted plate to the CPU block, GPU block, and top radiator

Bykski’s example routing for a CPU and one graphics card.

FAQ

Does this Corsair 5000D distro plate kit come with a pump?

Yes, the kit includes a DDC pump. The separately listed plate-only option ships without one.

How do I get the right CPU and GPU blocks?

Send your CPU model and socket and the exact graphics card model and PCB revision before ordering. We use these details to match the blocks to your hardware.

What size fittings and tubing does the plate use?

The plate has G1/4 ports. Bykski’s reference tubing and hardline fittings are sized for 14 mm outside diameter.

Can I use a 12 V RGB header for the lighting?

Use a 5 V 3-pin ARGB (Bykski RBW) connection. A 12 V 4-pin RGB header is incompatible.

Are the case and coolant included?

Provide the Corsair 5000D case and PC coolant separately.

Notes
  • This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
  • The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc..
  • If not notified in time, the Bykski's latest real object and the newest list shall prevail.

FormulaMod Official Store

Recent Reviews
+