Bykski
ASUS ROG Strix Helios Water Cooling Kit – Bykski RGV-AS-STRIXHS-P-V2 Distro Plate, 5V ARGB
Custom water cooling kit for the ROG Strix Helios
The Bykski RGV-AS-STRIXHS-P-V2 distro plate kit builds a CPU and single-GPU custom water cooling loop in the ASUS ROG Strix Helios (GX601). The acrylic plate mounts inside the case and brings the tubing runs from the water blocks and radiators to one panel. Share your CPU and graphics card models with FormulaMod to match the blocks to your hardware.
Compatibility
This kit is configured for a CPU and one graphics card in the original Helios case.
- ✓Confirmed case fit: ASUS ROG Strix Helios (GX601).
Before ordering, send FormulaMod your exact CPU and graphics card models. Confirm the CPU socket and GPU PCB layout or revision so the supplied water blocks match your hardware.
Design Highlights
Coolant channels and pump on one panel
The plate’s internal channels connect the tubing runs for the CPU block, GPU block, and radiators. The DDC pump mounts directly to the plate.
5V addressable lighting
The Bykski RBW strip lights the edge of the clear acrylic plate. For motherboard control, use a 5V 3-pin ARGB header and align the connector with the 5V pin.
Key Specifications
| Distro plate model | RGV-AS-STRIXHS-P-V2 |
|---|---|
| Kit SKU | RGV-AS-STRIXHS-P-V2_Kits |
| Plate material | Clear PMMA acrylic with an aluminum backplate |
| Distro plate dimensions, as drawn | 305 × 130 × 32 mm (L × W × T) |
| Plate port thread | G1/4 |
| Pump mount | Direct-mount DDC |
| Plate lighting | 5V 3-pin ARGB (Bykski RBW) |
| Radiator clearance | Designed for radiators up to 30 mm thick, measured without fans |
Which Version Do I Need?
Reference Kit Contents
Before ordering, confirm the actual parts list and quantities with FormulaMod.
Installation & Use
Supply your own PC coolant.
FAQ
Which ASUS ROG Strix Helios case does this kit fit?
It fits the original ASUS ROG Strix Helios, model GX601.
Which CPU and GPU water blocks will I get?
Send FormulaMod your exact CPU and graphics card models before ordering so we can match the blocks to your CPU socket and GPU PCB.
What fittings does the distro plate take?
The plate takes G1/4 fittings. Match your hard tubing to the size of the tubing fittings in your confirmed parts list.
What lighting header does the plate use?
Use a 5V 3-pin ARGB header for motherboard control.
Do I need to buy coolant separately?
Yes. Provide your own PC coolant to fill the loop.
- This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
- This distro plate kit, which only include the products in the corresponding kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
- The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
- This kit does not contain any coolant. Due to strict restrictions on transport liquids.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.. If not notified in time, the Bykski's latest real object and the newest list shall prevail.









