• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS ROG Strix Helios Water Cooling Kit – Bykski RGV-AS-STRIXHS-P-V2 Distro Plate, 5V ARGB

stars, based on ( 1 ) reviews
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-AS-STRIXHS-P-V2

Custom water cooling kit for the ROG Strix Helios

The Bykski RGV-AS-STRIXHS-P-V2 distro plate kit builds a CPU and single-GPU custom water cooling loop in the ASUS ROG Strix Helios (GX601). The acrylic plate mounts inside the case and brings the tubing runs from the water blocks and radiators to one panel. Share your CPU and graphics card models with FormulaMod to match the blocks to your hardware.

Fits
ROG Strix Helios GX601
Loop layout
CPU + one GPU
Plate ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

This kit is configured for a CPU and one graphics card in the original Helios case.

  • ✓Confirmed case fit: ASUS ROG Strix Helios (GX601).

Before ordering, send FormulaMod your exact CPU and graphics card models. Confirm the CPU socket and GPU PCB layout or revision so the supplied water blocks match your hardware.

Design Highlights

Bykski RGV-AS-STRIXHS-P-V2 clear acrylic plate showing its coolant channels and mounted finned DDC pump

Coolant channels and pump on one panel

The plate’s internal channels connect the tubing runs for the CPU block, GPU block, and radiators. The DDC pump mounts directly to the plate.

Bykski RGV-AS-STRIXHS-P-V2 distro plate illuminated by its multicolor addressable LED strip

5V addressable lighting

The Bykski RBW strip lights the edge of the clear acrylic plate. For motherboard control, use a 5V 3-pin ARGB header and align the connector with the 5V pin.

Key Specifications

Distro plate modelRGV-AS-STRIXHS-P-V2
Kit SKURGV-AS-STRIXHS-P-V2_Kits
Plate materialClear PMMA acrylic with an aluminum backplate
Distro plate dimensions, as drawn305 × 130 × 32 mm (L × W × T)
Plate port threadG1/4
Pump mountDirect-mount DDC
Plate lighting5V 3-pin ARGB (Bykski RBW)
Radiator clearanceDesigned for radiators up to 30 mm thick, measured without fans

Which Version Do I Need?

RGV-AS-STRIXHS-P-V2_Kits · Full loop kitTHIS PAGE
Choose this kit if you need the parts for a CPU and single-GPU loop and want FormulaMod to match the water blocks.
Choose the separate plate listing if you’re sourcing the rest of the loop yourself. It offers a pump with a heatsink cover or a no-pump option.

Reference Kit Contents

Acrylic distro plateCPU water blockGPU water blockDDC pumpRadiatorsRadiator fans5V lighting controller (manufacturer’s reference configuration)Hard tubingFittings

Before ordering, confirm the actual parts list and quantities with FormulaMod.

Installation & Use

1
Check the confirmed parts list against your system. Align the distro plate with its mounting points inside the case and secure it.
2
Install the matched water blocks and radiator assemblies. Route hard tubing between the blocks, radiators, and distro plate using fittings that match the tubing. If your kit includes a CPU port adjustment module, use it where needed to align the CPU tubing.
3
Connect the pump using the wiring instructions for the supplied model. For motherboard lighting control, use the 5V 3-pin ARGB header.
4
Fill the loop with PC coolant before starting the pump. Power only the pump while you check the fittings and seams for leaks. Power the rest of the system after the loop passes the leak test.

Supply your own PC coolant.

FAQ

Which ASUS ROG Strix Helios case does this kit fit?

It fits the original ASUS ROG Strix Helios, model GX601.

Which CPU and GPU water blocks will I get?

Send FormulaMod your exact CPU and graphics card models before ordering so we can match the blocks to your CPU socket and GPU PCB.

What fittings does the distro plate take?

The plate takes G1/4 fittings. Match your hard tubing to the size of the tubing fittings in your confirmed parts list.

What lighting header does the plate use?

Use a 5V 3-pin ARGB header for motherboard control.

Do I need to buy coolant separately?

Yes. Provide your own PC coolant to fill the loop.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • This distro plate kit, which only include the products in the corresponding kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
  • The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.. If not notified in time, the Bykski's latest real object and the newest list shall prevail.
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+