• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Lian Li O11 Dynamic Mini Distro Plate with DDC Pump, Bykski RGV-LAN-O11MINI-LI-P

stars, based on ( 0 ) review
$179.66 piece
items available
Contact Us
FormulaMod Official Store
Bykski · RGV-LAN-O11MINI-LI-P

Front distro plate with DDC pump for the O11 Dynamic Mini

The Bykski RGV-LAN-O11MINI-LI-P is a front-mounted acrylic distro plate for the original Lian Li O11 Dynamic Mini. Its built-in reservoir and channels give you a central point for routing coolant between the blocks and radiator in a single-GPU custom loop. This configuration includes a DDC pump and cover.

Fits
Lian Li O11 Dynamic Mini
Pump
DDC with cover
Port thread
G1/4

Compatibility

  • ✓Lian Li O11 Dynamic Mini (original model)

Check the exact model name on your case before ordering. Plan your radiator placement and tube runs around the hardware in your build.

Bykski RGV-LAN-O11MINI-LI-P installed at the front of a Lian Li O11 Dynamic Mini with red hard tubing

Bykski build example showing the front-mounted plate and hard-tube routing.

Design Highlights

Bykski RGV-LAN-O11MINI-LI-P close-up of the clear acrylic, coolant channels, and port openings

Coolant routing at the front

The channels and reservoir sit behind clear acrylic. Use the G1/4 ports to route tubing to your water blocks and radiator.

Bykski RGV-LAN-O11MINI-LI-P acrylic plate with a finned cover on the mounted DDC pump

Manufacturer photo of a covered pump mounted on the plate.

Pump mounts on the plate

The DDC pump mounts directly on the distro plate, so you can plan the tubing around the front of the case.

Key Specifications

Plate modelRGV-LAN-O11MINI-LI-P
Pump bundle SKURGV-LAN-O11MINI-LI-P_DPC
Plate materialClear PMMA (acrylic)
Drawing dimensions332.95 × 213.76 × 31.50 mm
Port threadG1/4
PumpDDC with cover
Loop layoutSingle GPU
Bykski RGV-LAN-O11MINI-LI-P dimensioned face and side views showing the location of the covered pump

Bykski dimension drawing. Measurements are in millimeters.

Which Version Do I Need?

Use the full case name to choose your distro plate.

O11 Dynamic Mini · RGV-LAN-O11MINI-LI-PTHIS PAGE
Choose this front plate with a covered DDC pump for the original O11 Dynamic Mini.
Choose this separately listed plate if your case is the O11 Air Mini.

What's in the Box

1 × acrylic distro plateDDC pump with coverMounting screws

Installation & Use

1
Loosely secure the distro plate at the front of the case with the mounting screws.
2
Fit the G1/4 fittings and route the tubing to your water blocks and radiator. Tighten the mounting screws once the tubing lines up.
3
If your plate has a lighting cable, check its connector and voltage before connecting it to a matching motherboard header.
4
Fill the reservoir before powering the pump. Run only the pump during the leak test, with the rest of the PC unpowered. Keep coolant at the pump inlet while filling.

For the rest of the loop, choose water blocks for your hardware, a radiator, G1/4 fittings, matching tubing, and PC coolant.

FAQ

Which Lian Li O11 Mini does this fit?

It is made for the original Lian Li O11 Dynamic Mini. If your case is the O11 Air Mini, see the separate model above.

Does this distro plate come with a pump?

Yes. This configuration includes the DDC pump and its cover.

Which fittings and tubing should I buy?

Use G1/4 fittings at the plate. Match the tubing size to the fittings you choose.

Notes
  • Keep liquids containing alcohol away from the acrylic. Use a coolant formulated for PC water cooling and avoid pastel coolants or coolants with a high concentration of pigment particles.
  • All pumps, radiators, reservoirs, cases, fittings, and other products in details photos are for reference only.
  • As the products upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the latest real object shall prevail

FormulaMod Official Store

Recent Reviews
+