Bykski
Corsair 5000D Distro Plate, Bykski RGV-COS-5000D-P, 5 V ARGB, No Pump
Acrylic distro plate for the Corsair 5000D
The Bykski RGV-COS-5000D-P is a clear acrylic distro plate for a custom water-cooling loop in the Corsair 5000D. Its built-in reservoir and coolant channels bring the tubing from your CPU block, GPU block, and radiator to one place. The plate ships with 5 V addressable lighting and has a direct mount for a compatible DDC pump. The pump is sold separately.
Compatibility
Bykski specifies this case for the plate.
- ✓Corsair 5000D
Check the full model name on your case before ordering. Measure the clearance for your radiator and fans with the plate in place.
Design Highlights
Reservoir and coolant channels in one plate
The clear acrylic lets you see the coolant level in the reservoir. Internal channels carry coolant between connections on the plate, leaving the external tubing runs for your water blocks and radiator.
Port map for planning your loop
In Bykski’s front view, 1–2 mark the radiator connections, 3 the fill and vent port, 4–5 the CPU block connections, 6–7 the GPU block connections, 8 the adjustment module mounting points, and 9 the drain.
Key Specifications
| Model (SKU) | RGV-COS-5000D-P |
|---|---|
| Case | Corsair 5000D |
| Plate material | Clear PMMA (acrylic) |
| Plate dimensions (L × W × T) | 353 × 123 × 30.5 mm without pump |
| Port thread | G1/4 |
| Pump mount | DDC |
| Lighting | 5 V 3-pin ARGB (Bykski RBW) |
Which Version Do I Need?
What's in the Box
The DDC pump and lighting controller are sold separately.
Installation & Use
You also need a Corsair 5000D case, a radiator and fans, water blocks for your hardware, G1/4 fittings and stop plugs, matching tubing, and PC loop coolant. For the direct mount, use a compatible DDC pump sold separately.
FAQ
Will this distro plate fit my case?
Bykski lists the Corsair 5000D. Check your full case model before ordering.
Does the plate include a pump?
This version ships without a pump. Choose a compatible DDC pump for the direct mount.
Do I need a separate reservoir?
The plate has its own reservoir chamber for the coolant.
What fittings and tubing do I need?
Use G1/4 hard-tube fittings and tubing with the outside diameter specified by those fittings.
Where do I connect the ARGB lighting?
Use the sync cable to connect to a 5 V 3-pin ARGB header. A 12 V 4-pin RGB header is incompatible.
- This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
- All pumps, radiators, reservoirs, cases, fittings and other products in details photos are for reference only.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
- If not notified in time, the Bykski's latest real object shall prevail.












