Bykski
ASUS ROG Z11 Distro Plate with DDC Pump and Cover | Bykski RGV-AS-Z11-P
A front-mounted distro plate for your ROG Z11 loop
The Bykski RGV-AS-Z11-P is a front-mounted distribution plate for custom liquid cooling in the ASUS ROG Z11 case. Channels in the clear acrylic plate route coolant between your water blocks and radiator. This configuration comes with a preinstalled DDC pump and heatsink cover, so the pump mounts directly to the plate.
Compatibility
This plate mounts at the front of the case.
- ✓ASUS ROG Z11 case
The illustrated loop uses one GPU water block. Check your case model, then test-fit your chosen water blocks, radiator, and fittings before cutting tubing.
Design Highlights
Clear acrylic coolant channels
The CNC-machined channels are visible through the acrylic. The threaded ports give you connection points for tubing runs to your water blocks and radiator.
DDC pump mounted to the plate
The pump arrives installed under its finned heatsink cover. It draws power from a 4-pin Molex connector and uses a separate 4-pin PWM connection for speed control.
5V addressable lighting
The included ARGB strip lights the acrylic from the edge. Use the sync cable to connect it to a compatible 5V 3-pin ARGB header.
Key Specifications
| Manufacturer model | RGV-AS-Z11-P |
|---|---|
| FormulaMod SKU | RGV-AS-Z11-P_DPC |
| Plate material | Clear CNC-machined PMMA (acrylic) |
| Plate dimensions (L × W × T) | 360 × 113.50 × 31.50 mm |
| Port thread | G1/4 |
| Pump | Preinstalled DDC with heatsink cover |
| Pump connections | 4-pin Molex power and 4-pin PWM control |
| Lighting | 5V 3-pin ARGB (Bykski RBW) |
Which Version Do I Need?
What's in the Box
Installation & Use
You also need water blocks for the components you want to cool, a radiator and fans, G1/4 fittings, tubing, and coolant.
FAQ
Which case fits this Bykski distro plate?
Bykski lists the ASUS ROG Z11. The plate mounts at the front of that case.
Does this configuration include a pump?
Yes. A DDC pump with its heatsink cover comes installed on the plate.
How do I connect the lighting?
Use the included sync cable with a 5V 3-pin ARGB header. A 12V 4-pin RGB header is incompatible, and a standalone lighting controller is sold separately.
What fittings should I use?
Use G1/4 fittings. Choose the tubing side of each fitting to match your tubing.
How much space does the plate take up?
The plate drawing shows a length of 360 mm, a width of 113.50 mm, and a thickness of 31.50 mm. Allow extra clearance for the pump, fittings, and tubing.
- This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc.. If not notified in time, the Bykski's latest real object shall prevail.













